Hunter Pro-Spray Sprinkler Head Reviews
| Overall Rating | No Ratings |
Pro-Spray Spray Sprinkler
A rugged contractor-friendly spray for residential and commercial projects.
The Pro-Spray has been manufactured with the precision required to ensure reliable operation and peak performance for years to come. This solid performer boasts heavy-duty ABS construction, including an extra-thick body and cap. Exclusive body ribs make it easier to install, adjust, and service while also providing more stability for the sprinkler in loose soils. But brawn isn’t all this product offers. The sprinkler also features a user-friendly “pull-ring” flush cap that helps keep debris to a minimum and a multi-function wiper seal that eliminates flow-by. Add in its compatibility with all industry standard female nozzles–as well as Hunter’s own complete line-up of adjustable, fixed, and specialty nozzles–and you have the industry’s most sophisticated spray sprinkler. A spray designed with the professional in mind.
Heavy-duty body and cap construction
Multi-thread buttress design withstands the harshest environments
Pressure activated, multi-function, no flow-by wiper seal
Easy to remove and clean; treated with UV inhibitors to ensure long life
Compatible with All Female Threaded Nozzles
Accepts adjustable, fixed and specialty nozzles from Hunter and all major brands
Optional factory-installed drain check valve for up to 10 feet elevation change
Eliminates landscape damage from flooding and erosion
Ratcheting riser for quick arc alignment
Make adjustments while sprinkler is operating
Heavy-duty spring
For positive retraction under any conditions
Innovative pop-top flush plug design
Allows limited flow permitting controlled directional flushing
1/2″ standard side inlet on 6″ and 12″ models
Installation convenience for deep seated bodies
PROS-00 – Shrub
PROS-02 – 2″ Pop-up (5 cm)
PROS-03 – 3″ Pop-up (7.5 cm)
PROS-04 – 4″ Pop-up (10 cm)
PROS-06 – 6″ Pop-up (15 cm)
PROS-12 – 12″ Pop-up (30 cm)
•
PROS-02 – 4″(10 cm)
PROS-03 – 5″ (12.5 cm)s
PROS-04 – 5 7⁄8″ (15.5 cm)
PROS-06 – 8 3/4″ (22.5 cm)
PROS-12 – 16 1⁄8″ (41 cm)
• 1/2″ female inlet NPT
• Exposed diameter: 2 1/4″ (5.7 cm)
• Recommended pressure range: 15 to 70 PSI (1.0 to 4.8 bars; 103 to 482 kPa)
• Flow-by: 0 at 10 PSI (.7 bars; 68 kPa) or greater; .1 GPM (0.02 m3/hr; 0.4 l/min) otherwise
• Precipitation rates: approximately 1.5″ (38 mm) per hour
• Factory-installed drain check valve for up to 10′ (3 m) elevation change;
“Check Valve” stamped on cap for easy ID
• Field-installed drain check valve (part # 437400)
• Field-installed black rubber cover (part # 469805)
• Field-installed reclaimed water identification snapon cover (part # 469800)
• Field-installed reclaimed water identification body cap (part # 458520),
with “Check Valve” stamped on cap for easy ID (part # 458525)
• Field-installed vandal-proof cap (part # PROS-VPC)
Leave a Reply