Hunter SRC Plus Controller

Simple. Convenient. Economical. The versatile controller that delivers Hunter quality to smaller sites.

Sophisticated technology and built-in convenience isn’t limited to just the most expensive products. The SRC Plus controller offers a proven track record of Hunter quality and reliability, as well as some of the features you’d assume might only be available on high-priced units. The SRC offers dial programming and a full three programs, each with four start times, plus such conveniences as a built-in 365-day calendar and a rain sensor bypass circuit–just the right features for the needs of smaller landscapes. Available in either 6- or 9-station models, the SRC is housed in a rugged cabinet that offers a polished, professional look. For economy, simplicity, and dependability…you won’t find a better value.

Dial programming
Easy program entry for installers and end-users

3 programs with multiple start times
Accommodates repeat watering requirements, morning, afternoon and evening

Large LCD display for simplified programming
Easy to read for schedule review and entry

365-day calendar clock
Accommodates odd/even watering restrictions, maximum flexibility

Rain sensor bypass
Quick override of rain sensor, no separate switch required

Non-volatile memory
Holds programs indefinitely, excellent insurance against unreliable power

Superior surge protection and self diagnostic short circuit protection
No fuses to worry about

Remote control ready
Supplied with connection for SRR and ICR remote controls

SRC Plus MODELS
SRC-600i – 6-station, Indoor Model with 120 VAC Plug-in Transformer
SRC-900i – 9-station, Indoor Model with 120 VAC Plug-in Transformer
SRC-601i – 6-station, Indoor Model without Plug-in Transformer
SRC-901i – 9-station, Indoor Model without Plug-in Transformer

 DIMENSIONS
• SRC Plus: 8 1/4″ H x 8 1/2″ W x 2 1/4″ D (21 cm H x 22 cm W x 6 cm D)

SPECIFICATIONS & FEATURES
• Station run time: 0-99 minutes in 1-minute increments
• Start times: 4 per day, per program, for up to 12 daily starts
• Day schedule: 7-day calendar or true odd-even programming
with 365-day calendar clock
• AM/PM or 24 hour clock option
• Start time stacking
• One button manual start and advance
• Transformer input: 120VAC, 60 Hz (transformer not included with export units)
• Transformer output: 24VAC, 0.75A
• Station output: 24VAC, 0.35A per station
• Maximum total output: 24VAC, 0.7A, includes master valve circuit
• Battery: Not required for program backup.
9 volt alkaline battery may be used to program controller in absence of AC power.
• Non-volatile memory for program data (no battery required to maintain program)
• Master valve output: 24VAC, 0.35A
• Surge protection: primary MOV-type
• Rain sensor override compatible with most major brands
• Test program feature allows for quick system checks.
• Preset test cycle on program “C”
• UL listed
• Central control compatible with Hunter IMMS™ system
• Hunter Quick Check™ helps troubleshoot field wiring problems
• Electronic Short Circuit Protection; automatically detects and skips shorted stations,
no fuses to replace
 

Hunter SRC-600i Owners Manual

Pro-C Controller

A complete family of modular, full-featured residential and light commercial controllers.

No need to bring along a variety of different-sized controllers to see which one is best for the job. With its ability to customize to the particular size you need (from 3 to 15 stations), the Pro-C will always be the right choice. A modular system also makes inventory a breeze–there are only three different units to stock (indoor cabinets, outdoor cabinets and station modules). But, modularity isn’t all this controller has to offer, with great features such as three programs with multiple start times, independent day scheduling options, “one touch” manual start and rapid advance, a programmable event day off, robust heavy-duty locking plastic cabinet, and superior surge protection. Pro-C: delivering maximum flexibility for landscapes that require a minimal number of stations.

Versatile modular design
Simplified inventory management; easily customize unit to desired number of stations U.S. Patent #’s 6,840,460 & 6,842,667

Large LCD display for simplified programming
Easy to read for schedule review and entry

Three programs (A ,B, C) with multiple start times
Independent programming handles many different watering requirements

Choice of independent day scheduling options
Days of the week, odd/even or 31-day interval for maximum flexibility

Global water budget/seasonal adjustment
Easily change run time of all zones from 10% to 150%

Non-volatile memory
Holds programs indefinitely; excellent insurance against unreliable power

Superior surge protection and self-diagnostic short circuit protection
Microcircuits are protected from electrical spikes, no fuses to worry about

Remote control ready
Supplied with connection for SRR and ICR remote controls

Pro-C MODELS
PC-300i – 3-station base unit controller,
indoor model, plug-in transformer, expands to 15 stations
PC-300 – 3-station base unit controller,
outdoor model, internal transformer, expands to 15 stations
PC-301i – International model 3-station base model
indoor plastic cabinet with plug-in transformer, expands to 15 stations
PC-301 –International model 3-station base unit controller,
outdoor model, internal transformer, expands to 15 stations
PCM-300 – 3-station plug-in module for use with any PC controller model
PCM-900 – 9-station plug-in module for use with any PC controller model
(expands Pro-C station capability to 15 stations with 1 PCM-300 installed)

DIMENSIONS
• Indoor Model: 8.3″ H x 9.6″ W x 3.7″ D
(21.1 cm H x 24.4 cm W x 9.4 cm D)
• Outdoor Model: 8.9″ H x 9.9″ W x 4.3″ D
(22.6 cm H x 25.1 cm W x 10.9 cm D)

SPECIFICATIONS & FEATURES
• Outdoor models, 120VAC transformer with internal junction box
• Indoor model, 120VAC three prong plug-in transformer
• Station output 24VAC .56 Amps
• Transformer output 24VAC 1.0 Amps
• Capable of operating equivalent of 3 solenoids simultaneously
• Operating Temperature: 0 to 150˚ F
• NEMA rated outdoor cabinet
• CE/UL Listed
• 4 start times per program for repeat watering needs
• Up to six hours run time on each station
• Automated chronological ordering of start times/start time stacking
• 365-day calendar with leap year intelligence
• Programmable event day off allows specific day(s) to be designated as always “off”
• Rain Sensor bypass switch compatible with microswitch based sensors, displays when sensor is active
• Programmable delay between stations of zero seconds to 4 hours for well recovery or slow-closing valves
• Programmable rain delay for 1 to 7 days
• Compatible with Hunter’s SRR and ICR remote control system
• Programmable pump/master valve circuit by station
• Hunter Quick Check™ helps troubleshoot field wiring problems
• Test program feature allows for quick system checks
• Central control compatible with Hunter IMMS™ system
• Automatic module recognition; automatically identifies stations when modules are installed or removed
• Non-volatile memory backs up watering programs and current date and time
• Electronic short circuit protection; detects and skips shorted stations, no fuse to replace

EC Controller

A proven track record combined with an economical price make this controller ideal for tract housing installations.

A masterpiece of modern technology that brings together the most desirable features, bundles them in a small, attractive package, and makes everything simple and easy to use. The new EC is designed for those who don’t want a big controller, but do want one with all the features that meet their irrigation requirements. Available in 2-, 4- and 6-station indoor and outdoor models, the EC offers all the features you would expect to find only on more expensive units – on-screen water budgeting for seasonal adjustment, interval watering options, station delay, one-touch manual start and advance and non-volatile memory (plus, it boasts a sturdy protective cabinet that includes a lockable case). Best of all, no controller is simpler to install and program. Both the faceplate and the easy-to-read LCD display feature internationally-recognized icons that make programming a snap. The EC controller. Just the latest example of how Hunter makes advanced engineering simple.

Intuitive dial programming

Enhanced dial design features easy grip, effortless program entry for installers and end-users

Seasonal adjustment (from 0% to 150%)

Easy on-screen adjustment (in 10% increments) alters the amount of watering to accommodate weather changes

3 programs with multiple start times

Accommodates repeat watering requirements, morning, afternoon and evening

Large LCD display with interactive icons

At-a-glance viewing makes programming easy, regardless of language

Choice of independent day scheduling options

For maximum watering flexibility (select days of the week or interval up to 31 days)

Weather sensor compatible

Incorporates hook-up capability to rain, moisture, temperature or wind sensors

Non-volatile memory

Excellent insurance against unreliable power; retains current time, day and program data

EC MODELS

EC-200i/201i – 2-station indoor controller

EC-400i/401i – 4-station indoor controller

EC-400/401 – 4-station outdoor controller

EC-600i/601i – 6-station indoor controller

EC-600/601 – 6-station outdoor controller

 DIMENSIONS

• Indoor Model: 5 1/2″ H x 5 3/4″ W x 2″ D

(13.3 cm H x 14.6 cm W x 5 cm D)

• Outdoor Model: 8 5/8″ H x 7″ W x 3 3/4″ D

(22 cm H x 17.8 cm W x 9.5 cm D)

SPECIFICATIONS & FEATURES

• 3 programs: A, B, C

• Start times: 4 per day, per program, for up to 12 daily starts

• Station run time: 0 minutes to 4 hours in 1-minute increments

• Day schedule: 7-day calendar or interval (1-31 day) watering

• AM/PM or 24-hour clock option

• Start time stacking

• One-button manual start and advance

• Seasonal adjust: 10-150% in 10% increments

• Transformer input: 110VAC, 60 Hz

• Transformer output: 24VAC, 0.625A

• Station output: 24VAC, 0.28A per station (maximum 1 valve)

• Maximum total output: 24VAC, 0.56A includes master valve circuit

• UL listed

• Battery: Not required for program backup.

9 volt alkaline battery may be used to program controller in absence of AC power

• Non-volatile memory for program data (no battery required to maintain program)

• Master valve output: 24VAC, 0.28A

• Electronic short circuit protection

• Surge protection: Primary MOV-type

• Controller will track time for 4 weeks in the event of a power outage (even without a 9 volt battery)

• Rain sensor override by manual operation

• Hunter Quick Check™ helps troubleshoot field wiring problems

ICC Controller

Superior flexibility, ease of use, and outstanding water management. All together in one commercial controller.

Hunter introduced the concept of personalized construction for controllers–allowing custom tailoring to more effectively handle the odd number of stations a system may require–and the acceptance has been overwhelming. Then again, why shouldn’t it be? After all, nothing else makes more sense when seeking the ideal choice to run irrigation systems at virtually any commercial site, from schools, parks, and sports fields to hotels, resorts, and apartment buildings. The idea is a simple one: a controller that’s “built” by combining sets of “modules” to create a system that can handle up to 48 stations and handle the different irrigation needs for turf, shrubs, and flower beds, as well as any special watering restrictions. Whatever size you choose, you’ll enjoy all the features one could want: dial programming; a large easy-to-read display; programmable master valve; 365-day calendar; rain sensor bypass; seasonal adjustment; a choice of plastic, metal, or stainless steel cabinets; and Hunter’s simplified user set-up. Hunter ICC, for the ultimate in flexibility.

Versatile modular design
Provides easy addition of more stations and simplified inventory management U.S. Patent #’s 6,840,460 & 6,842,667

4 fully-independent programs
Each with separate day cycles and 8 start times, offering total flexibility for complex landscapes

Independent day schedule options for each program
Maximize scheduling choices (select days of the week, true odd/even days, skip days up to 31 days)

Non-volatile 100-year memory
Program data is retained during power outages, without need for battery

Programmable pump circuit by station
Use pump only when needed; accommodate dual water sources

Cycle and Soak capability by station
Allows run times to be divided into repeat cycles to minimize run-off

Remote control ready
Supplied with connection for SRR and ICR remote controls

ICC MODELS
ICC-800-PL – 8-station controller, plastic cabinet, 32-station capacity
ICC-801-PL – International model, 8-station controller, plastic cabinet,
internal transformer, expands to 32-stations
ICM-400 – 4-station module for use with any ICC
ICM-800 – 8-station module for use with any ICC

DIMENSIONS
• Plastic Cabinet: 11″ H x 13 1/4″ W x 4 3/4″ D
(25.7 cm H x 33.7 cm W x 12.1 cm D)

SPECIFICATIONS & FEATURES
• Transformer input: 120/240VAC, 50/60Hz
• Transformer output: 24VAC, 1.5A
• Station output: 24VAC, 0.56A (2 valves)
• Maximum total output: 24VAC, 1.4A (5 valves),
includes master valve circuit
• Master valve output: 24VAC, 0.28A
• Rain sensor override compatible with most brands
utilizing a normally closed micro switch
• Seasonal adjustment: 10 to 150%
• Program “D” can run simultaneously with Program A, B, or C for drip
• Self-diagnostic circuit breaker:
Skips shorted stations and continues watering, no fuses to replace
• Station run times: Programs A, B, and C, 2 hours; Program D, 12 hours
• Programmable delay between stations up to 10 hours
• Programmable rain delay up to 7 days
• UL listed
• 365 day calendar
• Hunter Quick Check™ helps troubleshoot field wiring problems
• Test program feature allows for quick system checks
• Central control compatible with Hunter IMMS™ system
• Compatible with Hunter’s SRR and ICR remote control systems
• All models NEMA 3R rated for weather resistance
• One button manual start and advance
• Cycle and Soak capability by station

The Hunter Pro-C.

The Right Candidate for Any Job.

For a cost-effective candidate, the new Pro-C (PCC Series) is the best selection for contractors with fixed station control needs. The new controller also features some great benefits, including three programs with multiple start times, independent day scheduling options with a programmable “event day off”, one-touch manual start and rapid advance, one-button reset, a heavy duty locking cabinet, and two-level superior surge protection. For a higher client approval rating, elect Hunter.

Debating which controller to choose? The new Hunter Pro-C PCC Series is your cost-effective choice to save some capital. Focused on economics, the Pro-C PCC is a simple option for fixed station control, when you know what you need. And if you elect to have the new Solar Sync as a running mate, the Pro-C PCC is designed for the sensor to be installed directly in the controller cabinet, for a compact, coordinated system.

Specifications & Features

• Easy Retrieve Memory allows for retrieval of saved program.
• Total run time calculator determines total of individual station run times per program.
• Sensor programmable by station allows continued watering on specific zones during rain events.
• Remote control ready. Supplied with connection for ROAM and ICR remote controls.
• Large LCD display for simplified programming.
• Independent scheduling options: Days of the week, odd/even, or 31-day intervals.
• Non-volatile memory: No battery required for backing up programs and current date and time; holds programs indefinitely; excellent insurance against unreliable power.
• Two levels of superior surge protection: Includes Hunter Quick Check™ self-diagnostic short circuit protection; microcircuits are protected from electrical spikes, with no fuses to worry about.
• Three programs (A, B, C) with multiple start times: Independent programming handles various watering requirements.
• Central control compatibility: Ready to work with Hunter’s IMMS water management system.

Solar Sync: The best under the sun.

The Pro-C Conventional works even harder with our new Solar Sync. The solar sensor measures the sun’s rays and temperature to keep your lawn at peak performance with optimal watering. That means no worrying when temperatures are too hot or too cold. So take a break! We won’t tell.

ROAM Remote

The Pro-C Conventional works with Hunter’s ROAM Remote, the mid-range solution for residential and commercial applications, operating up to a 1000-foot range. Conveniently able to be attached to the Pro-C, it’s always on hand.

Hunter XC Hybrid Controller

Forget following that winding trail to find an accessible outlet. Hunter Industries’ new XC Hybrid Controller brings you the power without the plug. With all the great water management features of the XC Controller, the new XC Hybrid operates DC latching solenoids with battery power. Ready for outdoor or indoor installation, the XC Hybrid comes in 4, 6, 8, 10 and 12 station models, meaning it is your solution for a wide range of residential and commercial applications. Small residential areas, parks, gardens, roadway medians and roundabouts are ready for the XC Hybrid. Presenting Hunter. Unplugged.

Find advance water management control at your fingertips. Compact, user-friendly and battery powered, the XC Hybrid is proof big things come in small packages. Features such as a 365 day calendar, three independent programs (each with four start times), global seasonal adjustment and station-controlled sensors mean saving a little blue and a lot of green. And we’ve got you covered: With ‘Easy Retrieve’ memory backup and on-board, non-volatile memory, you’ve got the assurance to recall all the controller’s watering programs. Did we put the XC in ‘excellence’? You’ll think so.

Models

• XCH-400 – 4-station indoor/outdoor controller
• XCH-600 – 6-station indoor/outdoor controller
• XCH-800 – 8-station indoor/outdoor controller
• XCH-1000 – 10-station indoor/outdoor controller
• XCH-1200 – 12-station indoor/outdoor controller

DIMENSIONS

8-5/8” H x 7” W x 3-3/4” D

Specifications & Features

• Power source: 6AA batteries or 24 VAC (optional)
• Operates DC Latching Solenoids only (p/n 458200)
• Outdoor models, transformer with internal junction box
• Indoor models, with plug-in transformer
• 3 programs, A, B, C
• Start times: 4 per day, per program for up to 12 daily starts
• Station run time: 0 minutes to 4 hours in 1-minute increments
• Day schedule: 7-day calendar true odd/even programming with
  365-day calendar clock, or interval watering (up to 31 days)
• AM/PM or 24 hour clock option
• Automated chronological ordering of start times/start time stacking
• One-button manual start and advance
• Seasonal adjust: 0% to 150%
• Transformer input: 120 VAC, 60 Hz (domestic model)
• Transformer output: 24 VAC, 1.0 A (capable of operating equivalent of 3 solenoids simultaneously)
• Station output: 0.56 A
• Electronic short circuit detection
• Battery: 3V lithium (included) for remote programming and timekeeping, not required for program backup
• Programmable delay between stations
• Rain sensor bypass switch compatible with micro-switch based sensors, displays when sensor is active
• Programmable sensor input by station
• Easy Retrieve Memory – original program can be saved in non-volatile memory and retrieved later if needed
• Programmable rain delay from 1 to 7 days
• Programmable event day off allows specific day(s) to be designated as always “off”
• Hunter Quick Check™ helps troubleshoot field wiring issues
• Test program feature allows for quick system checks
• UL Listed/CE Approved

XC Controller

Entry-level residential controller with extra flexibility, features, and memory.

The new Hunter XC presents handy water management control in a compact, user-friendly controller that is capable of meeting the irrigation requirements for a wide range of residential landscapes. Simply put, the XC brings a whole lot extra to a small controller. Like extra power…the XC offers a choice of 2-, 4-, 6-, and 8-station models, each with plenty of might to operate one or two valves per station plus a pump start relay or master valve. Extra features…including global seasonal adjustment and a 365-day calendar to make water savings easier, plus a default system that permits retrieval of the original program entered into the controller. Extra flexibility…with three programs (each with four start times), multiple scheduling formats, and the ability to select sensor input by station. And extra memory…with a non-volatile on-board program backup and a high-energy lithium battery for timekeeping to assure you’ll never have to reprogram the controller due to power outages. The choice for those who demand outstanding reliability, the XC is where to turn for extra peace of mind.

Easy dial programming
Enhanced dial and push button programming makes the XC easy to operate

Global seasonal adjustment (0% to 150%)
Easy on-screen adjustment alters the amount of watering to accommodate changing weather conditions

3 independent programs with 4 start times each
Accommodates a wide range of watering requirements

Non-volatile memory
Excellent insurance against unreliable power; retains current time, day, and program data

Choice of independent day scheduling
For maximum watering flexibility (select days of the week, true odd/even, or interval watering)

Weather sensor compatible
The XC is compatible with rain, freeze, wind and other micro-switch type sensors. Each station can be programmed individually to accept or override the weather sensor input.

Easy-retrieve memory
Ability to retrieve your preferred program, stored in backup memory

Replaceable lithium battery (included)
For backup timekeeping and to enable remote programming of the controller

XC MODELS
XC-200i/201i – 2-station indoor controller
XC-400i/401i – 4-station indoor controller
XC-400/401 – 4-station outdoor controller
XC-600i/601i – 6-station indoor controller
XC-600/601 – 6-station outdoor controller
XC-800i/801i – 8-station indoor controller
XC-800/801 – 8-station outdoor controller

DIMENSIONS
• Indoor Model: 6 1/2″ H x 5 3/4″ W x 2″ D
(16.5 cm H x 14.6 cm W x 5 cm D)
• Outdoor Model: 8 5⁄8″ H x 7″ W x 3 3/4″ D
(22 cm H x 17.8 cm W x 9.5 cm D)

SPECIFICATIONS & FEATURES
• Outdoor models, transformer with internal junction box
• Indoor models, with plug-in transformer
• 3 programs, A, B, C
• Start times: 4 per day, per program for up to 12 daily starts
• Station run time: 0 minutes to 4 hours in 1-minute increments
• Day schedule: 7-day calendar true odd/even programming
with 365-day calendar clock, or interval watering (up to 31 days)
• AM/PM or 24 hour clock option
• Automated chronological ordering of start times/start time stacking
• One-button manual start and advance
• Seasonal adjust: 0% to 150%
• Transformer input: 120VAC, 60 Hz (domestic model)
• Transformer output: 24VAC, 1.0 amps
(capable of operating equivalent of 3 solenoids simultaneously)
• Station output: .56 amps
• Electronic short circuit detection
• Battery: 3V lithium (included) for remote programming and timekeeping, not required for program backup
• Programmable delay between stations
• Rain sensor bypass switch compatible with microswitch based sensors, displays when sensor is active
• Programmable sensor input by station
• Original program can be saved in non-volatile memory and retrieved later if needed
• Programmable rain delay from 1 to 7 days
• Programmable event day off allows specific day(s) to be designated as always “off”
• Hunter Quick Check™ helps troubleshoot field wiring issues
• Test program feature allows for quick system checks
• UL Listed/CE Approved