I-90 Rotary Sprinkler

Industry’s longest distance rotary sprinkler specifically designed for parks, sports fields, and public areas.

With a radius up to 96 feet from a single sprinkler, the I-90 boasts a coverage area no other commercial sprinkler can deliver. Yet, its reduced-size diameter and cushioned rubber cover make it the perfect choice for parks and wide-open lawn areas, as well as perimeter watering of athletic fields and horse arenas. The rotor is also perfectly easy to service, with a “jar-top” body cap that allows quick access to the filter screen and check valve with no extra pieces, parts, or tools required. The I-90 is offered in two models–a full-circle opposing-nozzle version or an adjustable arc model–each with color-coded nozzles that can be field-changed to match the specific needs of your site.

Extra-thick heavy-duty rubber cover
Helps keep playing surfaces safe

6 color-coded primary nozzles
Truly uniform coverage and fast identification

Jar top serviceability
Easy access to screen, gear drive and valve assemblies

Closed case rotor
Absolute protection from dirt

Proven, heavy-duty gear drive
Enduring reliability

Water activated riser seal
Clean flushing action and positive retraction

Heavy duty stainless steel spring
Assures positive retraction, time after time

Drain check valve to handle elevation change
Saves water, reduces liability

I-90 MODELS
I-90 36V – Full circle
I-90 ADV – Adjustable arc (40°–360°)DIMENSIONS
• Pop-up height: 3″ (7.6 cm)
• Female inlet: 1 1/2″ NPT or BSP
• Exposed diameter: 3 1/2″ (8.9 cm)
• Overall height: 11″ (28 cm)OPERATING SPECIFICATIONS
I-90 36V
• Discharge rate: 29.8 to 69.4 GPM (6.77 to 15.76 m3/hr, 113 to 263 l/min)
• Radius: 71′ to 96′ (21 to 29.3 m)
• Recommended pressure range: 60 to 100 PSI (4.1 to 6.9 bars; 275 to 689 kPa)
• Operating pressure range: 50 to 100 PSI (3.4 to 6.9 bars; 344 to 689 kPa)
I-90 ADV
• Discharge rate: 30.7 to 69.8 GPM (6.97 to 15.85 m3/hr, 116 to 264 l/min)
• Radius: 67′ to 90′ (20.4 to 27.4 m)
• Recommended pressure range: 60 to 100 PSI (4.1 to 6.9 bars; 275 to 689 kPa)
• Operating pressure range: 50 to 100 PSI (3.4 to 6.9 bars; 344 to 689 kPa)Note: To ensure optimum nozzle performance, the rotor should be operated in the “Recommended pressure range.” The sprinkler will work normally when used in the “Operating pressure range”, but nozzle performance may be reduced.

OPTIONS AVAILABLE
• Reclaimed water identification
• Factory-installed nozzles
• Turf Cup Kit (part # 467955)

Key to Features:
ADV = Adjustable Arc with Check Valve
36V = Full-Circle with Check Valve
ARV = Adjustable Arc, Reclaimed Water, with Check Valve
3RV = Full-Circle, Reclaimed Water, with Check Valve

I-60 Rotary Sprinkler

A large turf rotor that meets the demands of systems with lower pressures and smaller budgets.

Facilities with wide expanses of turf require rotors that can cover great distances. But, the farther the rotors are spread apart, the higher the pressure needs to be to cover the throw. With municipal water supplies, more often than not, the pressure is too low for the rotors to work effectively. Instead of the expense of installing a pump to get the pressure up to an operational level, Hunter offers you a more efficient (cost and performance) way. The I-60 lets you space rotors far enough apart, as is desirable in a large landscape such as a city park or community sports complex. Because it is designed to operate under lower pressure, it’s a rotor that makes good economic sense. And, since it uses less water to run, the I-60 also eliminates the need to install larger pipe (another savings for the budget conscious).

Patented Precision Distribution Control™
Assures even coverage at low pressures without the need for a booster pump

6 color-coded nozzles
Truly uniform coverage and fast identification

Stainless-steel riser
Increased durability in harsh soil conditions

Easy arc adjustment (40° – 360°)
Up, down, wet or dry with through the top convenience

Heavy-duty, water-lubricated gear drive
Enduring reliability, year after year

Patented VStat® self adjusting stator
No stator rings required, drives with more power and adds years to sprinkler life

Drain check valve for up to 10 feet elevation change
Saves water, reduces liability

I-60 MODELS
I-60 ADS – Adjustable arc (40°–360°)
I-60 36S – Full circle

DIMENSIONS
• Pop-up height: 3″ (8 cm)
• Overall height: 8 3⁄8″ (21 cm)
• Female inlet: 1″ NPT or BSP
• Exposed diameter: 1 3/4″ (4.45 cm)

OPERATING SPECIFICATIONS
I-60 ADS
• Discharge rate: 6.5 to 20.4 GPM (1.48 to 4.63 m3/hr; 24.6 to 77.2 l/min)
• Radius: 50′ to 66′ (15.2 to 20.1 m)
• Recommended pressure range: 40 to 60 PSI (2.8 to 4.1 bars; 275 to 413 kPa)
• Operating pressure range: 20 to 100 PSI (1.4 to 6.9 bars; 137 to 689 kPa)
• Precipitation rates: approximately .29″ to .52″ (7 mm to 13 mm) per hour
• Nozzle trajectory: 25˚
I-60 36S
• Discharge rate: 6.5 to 20.8 GPM (1.48 to 4.72 m3/hr; 24.6 to 78.7 l/min)
• Radius: 51′ to 67′ (15.5 to 20.4 m)
• Recommended pressure range: 40 to 60 PSI (2.8 to 4.1 bars; 275 to 413 kPa)
• Operating pressure range: 20 to 100 PSI (1.4 to 6.9 bars; 137 to 689 kPa)
• Precipitation rates: approximately .25″ to .55″ (6 mm to 14 mm) per hour
• Nozzle trajectory: 25˚

Note: To ensure optimum nozzle performance, the rotor should be operated in the “Recommended pressure range.” The sprinkler will work normally when used in the “Operating pressure range”, but nozzle performance may be reduced.

OPTIONS AVAILABLE
• Reclaimed water cover
• Factory-installed nozzles

The Spotlight is on the
I-40 Ultra Performance Rotor

INDIVIDUAL UNIFORMITY AND CLOSE-IN COVERAGE

The I-40 Ultra is the number one choice for sports facilities worldwide. Ideal for parks and commercial sites. A tough commercial rotor that delivers with accuracy at watering distances up to 70 feet. From stadiums to practice fields and other sites, this group performs. Plus, the aesthetics and strength of stainless steel is undeniable. Looks good, made to last. Choose the I-40 Ultra for ultimate performance, effective irrigation, and beautiful results.

Models

• I-40-04-SS – 4” Stainless steel, heavy-duty rotor
• I-40-04-SS-HS – 4” Stainless steel, high-speed heavy-duty rotor
• I-40-06-SS – 6” Stainless steel, heavy-duty rotor
• I-40-06-SS-HS – 6” Stainless steel, high-speed heavy-duty rotor

DIMENSIONS

• Overall height:
  • I-40-04-SS (SS-HS) – 7-7/8”
  • I-40-06-SS (HS) – 10-1/4″
• Female inlet: 1” NPT or BSP
• Exposed diameter: 2”

Operating Specifications

• Discharge rate: 7.0 to 28.2 GPM
• Radius for I-40, I40-04-SS, I40-06-SS: 45’ to 70’
• Radius for I-40-04-SS-ON, I-40-06-SS-ON: 52’ to 76’
• Radius for I-40-04-SS-HS, I-40-06-SS-HS: 41’ to 65’
• Recommended pressure range: 40 to 100 PSI
• Operating pressure range: 40 to 100 PSI
• Precipitation rates: approximately 0.33” to 0.48” per hour
• Nozzle trajectory: 25˚
• Drain check valve for up to 15′ elevation change

Options Available

• The turf cup kit (part # 460000) for the I-40 sprinkler allows the addition of a plug of living sod to the top of the riser. Perfect for areas where an invisible sprinkler is required. Not available for
  ON model.
• Dual opposing nozzle (full-circle version) I-40-04-SS-ON, I-40-06-SS-ON
• Reclaimed water cover
• Factory-installed nozzles

I-35 Sierra Rotary Sprinkler

Take performance to unimagined heights with complete control and cutting-edge innovation.

Discover the I-35 Sierra. The latest in Hunter commercial rotor technology. Pure simplicity takes the I-35 Sierra to new levels. We kept what makes Hunter rotors world famous and added features that make it more advanced. We believe in consistency—Every Hunter rotor adjusts exactly the same. And the I-35 is no exception. The result: a superior solution.

Features and Benefits:

Full and part circle operation in a single rotor, for reduced stock.

I-35 MODELS

• I-35 – 5 1/2″ (14 cm) Plastic riser, Commercial duty rotor
• I-35-SS – 5 1/2″ (14 cm) Stainless steel riser, Commercial duty rotor

DIMENSIONS

• Overall height: I-35, I-35-SS, I-35-HS – 10 3/8″ (26 cm)
• Female inlet: 1″ NPT or BSP
• Exposed diameter: 1 7⁄8″ (5 cm)

OPERATING SPECIFICATIONS

• Discharge rate: 7.7 to 31.5 GPM (1.65 to 7.24 m3/hr; 27.5 to 120.7 l/min)
• Radius for I-35: 47′ to 71′ (14.0 to 21.6 m)
• Radius for I-35-HS: 42′ to 67′ (12.5 to 20.4 m)
• Recommended pressure range: 40 to 100 PSI (2.5 to 7.0 bars; 248 to 696 kPa)
• Operating pressure range: 40 to 100 PSI (2.5 to 7.0 bars; 248 to 696 kPa)
• Precipitation rates: approximately .67″ to 1.2″ (17 to 31 mm) per hour
• Nozzle trajectory: 25˚

Note: To ensure optimum nozzle performance, the rotor should be operated in the “Recommended pressure range.” The sprinkler will work normally when used in the “Operating pressure range”, but nozzle performance may be reduced.

OPTIONS AVAILABLE

• For quick, light wetdowns of sports fields or any areas that require dust control, Hunter offers the high-speed version, I-35 HS, that cuts full circle rotation time from three minutes down to one
• Reclaimed water cover
• Factory-installed nozzles

I-25 Ultra Performance Rotor
More Distance, Larger Radius

The I-25 Ultra gets the job done while keeping your wallet at ease. This rotor covers more distance, hitting a radius of 40’ to 71’. The compact and built-to-last construction comes with an optional stainless steel riser for tough-as-nails strength. With a 5-year warranty, the I-25 Ultra has options for reclaimed water ID and high-speed. A standard check valve is built in, and a wide selection of high performance nozzles are availabe. Hunter I-25 Ultra rotors cover more distance and larger radius. Efficient, tough, and built to last.

Models

• I-25-04 – 3-1/2” Plastic riser, commercial duty rotor
• I-25-04-SS – 3-1/2” Stainless steel riser, commercial duty rotor
• I-25-04-SS-HS – 3-1/2” High speed, stainless steel riser, commercial duty rotor
• I-25-06 – 5-1/2” Plastic riser, commercial duty rotor
• I-25-06-SS – 5-1/2” Stainless steel riser, commercial duty rotor
• I-25-06-SS-HS – 5-1/2” High speed, stainless steel riser, commercial duty rotor

DIMENSIONS

• Overall height:
  • I-25-04 (SS, SS-HS) – 7-7/8”
  • I-25-06 (SS, SS-HS) – 10-1/4”
• Female inlet: 1” NPT or BSP
• Exposed diameter: 1-7/8”

Operating Specifications

• Discharge rate: 3.8 to 31.5 GPM
• Radius for I-25-04, I-25-06: 40’ to 71’
• Radius for I-25-04-SS-HS, I-25-06-SS-HS: 37’ to 67’
• Recommended pressure range: 40 to 100 PSI
• Operating pressure range: 40 to 100 PSI
• Precipitation rates: approximately 0.23” to 0.57” per hour
• Nozzle trajectory: 25˚
• Drain check valve for up to 10′ elevation change

OPTIONS AVAILABLE

• For quick, light wetdowns of sports fields or any areas that require dust control, Hunter offers the high-speed version, I-25 Ultra HS, that cuts full circle rotation time from three minutes down to one.
• Reclaimed water cover.
• Factory-installed nozzles.

I-10/I-20 Ultra Rotary Sprinkler

The rotor with heavy-duty commercial-grade features that’s equally at home in a residential setting.

If you’ve ever desired the convenience of being able to use just one rotor to cover all of your needs, here it is. Got a small area for which you don’t want to create a separate spray zone? Is a portion of your landscape in sandy soil? Is the landscape a mix of shrub zones and expanses of grass? Does one part of the turf require a higher cut? With all the features on today’s I-20 Ultra (most notably its ability to effectively cover a radius range from 17 up to 47 feet) there’s a single-sprinkler alternative to stocking a variety of rotors and sprays. With over 20 different nozzle choices, the I-20 Ultra rotor can handle the full range of irrigation needs.

Integral rubber cover
Stays put to keep play areas safe

Choice of 22 different nozzles
Allows sprinkler to be custom fitted to all spacings from 18′ to 47′

FloStop® Control
Allows stoppage of flow through an individual head while remainder of system is running

Easy arc adjustment (40° – 360°)
Right at the top of the sprinkler

Continuously improved, water-lubricated gear drive
Backed by over a decade of proven reliability

Extra-strong spring
Reliable retraction every time

Drain check valve for up to 10 feet elevation change
Saves water, reduces liability

Optional Stainless Steel Riser
Added strength for the harshest conditions

I-10/I-20 Ultra MODELS
I-10 – Shrub
I-20 – 4″ Pop-up (10 cm)
I-20-6P – 6″ Pop-up (15 cm)
I-20-HP – 12″ Pop-up (30 cm)DIMENSIONS
• Overall height:
I-10 – 7 3/4″ (20 cm)
I-20 – 7 3/8″ (19 cm)
I-20-6P – 9 7/8″ (25 cm)
I-20-HP – 17″ (43 cm)
• 3/4 ” female inlet NPT
• Exposed diameter: 1 3/4″ (4 cm)OPERATING SPECIFICATIONS
• Discharge rate: .9 to 14.3 gpm (0.20 to 1.86 m3/hr; 3.4 to 31.0 l/min)
• Radius: 17′ to 47′ (5.2 to 14.3 m)
• Recommended pressure range:
40 to 60 psi (2.8 to 4.1 bars; 275 to 413 kPa)
• Operating pressure range: 20 to 100 PSI (1.4 to 6.9 bars; 137 to 689 kPa)
• Precipitation rates:approximately .4″ (10 mm) per hour at 50 psi (3.4 bars; 344 kPa) for spacing from 18′ to 45′ (7.6 to 13.7 m)
• Nozzle trajectory: standard – 25°; low-angle – 13°
• Drain check valve for up to 10′ (3.0 m) elevation changeNote: To ensure optimum nozzle performance, the rotor should be operated in the “Recommended pressure range.” The sprinkler will work normally when used in the “Operating pressure range”, but nozzle performance may be reduced.OPTIONS AVAILABLE
• Reclaimed water cover
• Stainless steel riser (4″ & 6″ I-20 only)
• Factory-installed nozzles (Standard and LA only)

Key to Features:
ADJ = Adjustable Arc without Check Valve
360 = Full-Circle without Check Valve
ADV = Adjustable Arc with Check Valve
36V = Full-Circle with Check Valve
ADS = Adjustable Arc, Stainless Steel Riser, with Check Valve
36S = Full-Circle, Stainless Steel Riser, with Check Valve
ARV = Adjustable Arc, Reclaimed Water, with Check Valve
3RV = Full-Circle, Reclaimed Water, with Check Valve
ARS = Adjustable Arc, Reclaimed Water, Stainless Steel Riser,
with Check Valve
3RS = Full-Circle, Reclaimed Water, Stainless Steel Riser,
with Check Valve

Hunter PGP Ultra Rotors

The new PGP Ultra is a blockbuster of epic proportions.  Ready to thrill you, this action packed feature from the award-winning Hunter Industries stars the same great lineup of the original PGP:  Through-the-top adjustment, large nozzle selection, and the industry’s most reliable and proven drive-train assembly.

But the newcomers are what make it Ultra:

• Full-circle adjustment from 50 to 360 degrees
• Non-strippable drive mechanism with auto-arc return
• Headed and slotted nozzle retainer screw. You can use either a Hunter wrench or a standard slotted screwdriver
• Improved dirty-water tolerance on the internal gear drive.

Models

• PGP-00 – Shrub
• PGP-04 – 4” Pop-up (10 cm)
• PGP-12-V – 12” Pop-up (5 cm)

DIMENSIONS

• Overall height:
  PGP-00 – 7-3/8” (19 cm)
  PGP-04 – 7-3/8” (19 cm)
  PGP-12-V – 17” (43 cm)
• 3/4” female inlet NPT
• Exposed diameter: 1-3/4” (4 cm)

Operating Specifications

• Discharge rate: 0.9 to 14.8 GPM (0.20 to 3.36 m3/hr; 3.4 to 56.0 l/min)
• Radius: 17′ to 47′ (5.2 to 14.3 m)
• Recommended pressure range: 30 to 70 PSI (2.1 to 4.8 bars; 206 to 482 kPa)
• Operating pressure range: 20 to 100 PSI (1.4 to 6.9 bars; 137 to 689 kPa)
• Precipitation rates: approximately 0.4″ (10 mm) per hour at 50 PSI (3.4 bars; 344 kPa) for spacing from 18′ to 45′ (5.5 to 13.7 m)
• Nozzle trajectory: standard – 25˚; low angle – 13˚
• Drain check valve for up to 10′ (3.0 m) elevation change
• Factory-installed nozzles

Options Available

Reclaimed water cover

PGJ Rotary Sprinkler

All the features and benefits of the PGP ,
scaled down to fit typical spray applications.

A rack of easy-to-install-and-change, water-efficient nozzles…just like PGP. Easy adjustment from the top of the sprinkler…just like PGP. The safety and durability of a rubber cover…just like PGP. The PGJ is a chip off the ol’ block, in essence a PGP “junior.” Hunter has scaled down the world’s top-selling sprinkler exclusively for use in applications that typically call for a spray but where it’s now possible to have all the benefits of a rotor. The PGJ is capable of working in tandem with larger rotors to combine big and small areas in a single zone, offering a convenience and efficiency that sprays do not. With PGJ, fewer heads perform more efficient work for a more economical price.

Radius adjustment screw
Allows fine tuning of spray, ensures positive nozzle retention, can’t be lost

Protective rubber cover
Keeps debris out

40°– 360° adjustable arc
Easily adjustable from top of sprinkler, up, down, wet or dry

Water-lubricated gear drive
Time proven, reliable rotation, year after year

Variable stator
Keeps rotation speed consistent regardless of nozzle size or pressure

Extra large filter screen
Traps more debris without clogging

Optional factory-installed drain check valve
Prevents wet spots, caused by low head drainage

PGJ MODELS

PGP® Rotary Sprinkler.

The world’s best selling residential and light commercial rotor sets the standards for an entire industry.

Why settle for second best when you can have the sprinkler by which everything else is measured. The PGP® is Hunter’s original product, the item that put the company on the map in 1981. Its exceptional design and impressive performance placed the rotor a cut above back then, while continuous improvements and enhancements have allowed it to remain the number one selling rotor in the world ever since. With the superior ability to deliver even water distribution from precision engineered nozzles, this sprinkler is unequaled for reliability, durability, versatility, and value. With its patented features and Hunter’s years of experience in gear-drive technology, it’s no wonder the PGP remains the professional’s choice.

Model

• PGP-ADJ – 4”  Adjustable Pop-up (10 cm)
• PGP-FC – 4″ Full Circle Pop-up (10 cm)

DIMENSIONS

• Overall height: PGP-ADJ – 7-3/8” (19 cm)
• 3/4” female inlet NPT
• Exposed diameter: 1-3/4” (4 cm)

Operating Specifications

• Discharge rate: 0.5 to 14.1 GPM (0.11 to 3.20 m3/hr; 1.9 to 53.4 l/min)
• Radius: 22′ to 52′ (6.7 to 15.8 m)
• Recommended pressure range: 30 to 70 PSI (2.1 to 4.8 bars; 206 to 482 kPa)
• Operating pressure range: 20 to 100 PSI (1.4 to 6.9 bars; 137 to 689 kPa)
• Precipitation rates: approximately 0.4″ (10 mm) per hour at 50 PSI (3.4 bars; 344 kPa) for spacing from 18′ to 45′ (5.5 to 13.7 m)
• Nozzle trajectory: standard – 25˚; low angle – 13˚

Options Available

• Drain check valve for up to 10′ (3.0 m) elevation change
• Reclaimed water identification cover
• Low angle nozzles
• Factory-installed nozzle