5000/5000 Plus Series Rotors

The Next Evolution in Rotor Performance

• Greener grass with less water – Rain Curtain™ nozzles deliver superior uniformity
• Even greater water savings with optional in-stem pressure regulation (PRS)
• Faster to install with matched precipitation rate using MPR nozzle set

Features

• Faster maintenance with a new self-cleaning arc adjustment screw
• 5000, 5000 Plus and 5000 Plus PRS Series Rotors are available in 4”, 6”, 12”, Shrub, and Stainless Steel (5000 Plus/5000 Plus PRS 4” & 6” only) models
• Standard rubber cover for extra protection. 5000 Plus/5000 Plus PRS feature a green cover while the 5000 features a black cover
• Heavy-duty cover assembly for extra durability in residential or commercial applications
• Rain Curtain™ Nozzles
• The 5000 Plus features a Flow Shut-Off device to stop the flow of water to a particular head while the system is still in operation.
• Slip clutch mechanism for quick adjustment on installation
• Heavy-duty retract spring assures positive pop-down
• Tree of nozzles including four low angle (Angle of Trajectory 10°) and eight standard angle Rain Curtain™ Nozzles (Angle of Trajectory 25°) provides 25 to 50 (7,6 to 15,2 m) distance of throw
• Award-winning MPR nozzle set simplifies design and installation by providing matched precipitation from 25’ to 35’ (7,6 to 10,7 m) (see page 52)
• Top-adjust arc adjustment requiring only a flat-blade screwdriver
• Five-year trade warranty
• 40 – 360° arc rotation and reversing full circle rotation in one. (A nonreversing full circle only unit is also available)
• Radius adjustment screw allows up to 25% radius reduction without changing nozzles
• True 4” (10 cm), 6” (15,2 cm) and 12” (30,5 cm) pop-up (measured from the cover to the nozzle)
• Pressure-activated multi-function wiper seal protects internals from debris and assures positive pop-up and retraction
• Reinforced flow path for additional side load strength
• Additional O-rings and seals for extra protection in “gritty” water
• Optional stainless steel riser helps deter vandalism on public turf areas (4” and 6” 5000 Plus/5000 Plus PRS only)
• Optional pre-installed Rain Curtain™ nozzle on most popular nozzles
• Optional Seal-A-Matic (SAM)™ check valve holds up to 7 feet (2,1 m) of elevation change, to prevent puddling and erosion caused by low head drainage
• Optional non-potable purple cover for easy identification of reclaimed water

Operating Range

• Precipitation rate: 0.20 to 1.01 inches per hour (5 to 26 mm/h)
• Radius: 25 to 50 feet (7,6 to 15,2 m)
• Radius may be reduced up to 25% with radius reduction screw
• Pressure: 25-65 psi (1,7 to 4,5 bar)
• Flow Rate: 0.73 to 9.63 gpm (4,2 to 36,6 l/m)

Specifications

• 3⁄4” (20/27) NPT female bottom threaded inlet
• Reversing full and part circle adjustment 40° – 360°
• Full circle only adjustment 360°

Dimensions

• Pop-up height: Shrub; 4” (10,2 cm); 6” (15,2 cm); 12” (30,5 cm)
• Overall body height: Shrub: 7 3⁄4” (19,7cm) 4”: 7 3⁄8” (18, 5 cm); 6”: 9 5⁄8” (24,5 cm); 12”: 16 7⁄8” (42,9 cm)
• Exposed surface diameter: 1 5⁄8” (4,1 cm)

Note: Pop-up height measured from the cover to the nozzle. Overall body height is measured popped down

Optional PRS Feature

• In-stem pressure regulator (PRS) reduces operating pressure to 45 psi (3,1 bar) for optimal nozzle performance
• PRS saves water by:
  - Eliminating head-to-head pressure variations
  - Eliminating misting due to high pressure
  - Improving nozzle distribution uniformity by operating the nozzle at optimum pressure
• Maintenance-free design can be easily retrofitted into existing 5000/5000 Plus, T-Bird™ and Hunter® PGP™ (using UPG model) rotor cases without digging up the entire body
• Pressure: 25-75 psi (1,7 to 5,2 bar)

Models

Part-Circle units (PC) are adjustable from 40 –360 degrees.
Full-Circle units (FC) are 360 degrees only.

• 5004-(PC or FC)-(SAM)-(NP)
• 5006-(PC or FC)-(SAM)-(NP)
• 5012-(PC or FC)-(SAM)-(NP)
• 5000-S-PL-(PC or FC)-(SAM)-(R)-(NP) – standard with SAM
• 5004-PL-(PC or FC)-(SAM)-(R)-(NP)-(SS)
• 5006-PL-(PC or FC)-(SAM)-(R)-(NP)-(SS)
• 5012-PL-(PC or FC)-(SAM)-(R)-(NP)

Note: Many models are available with a 2.0 or 3.0 nozzle pre-installed. NP and SS versions come standard with a SAM, PRS available in 5000 Plus

Falcon® 6504

Full- or Part-Circle Rotor Pop-Up Sprinklers

Primary Applications:

With the Falcon 6504 rotor, you can have it all — uncompromising performance, superior distribution, reliability and durability. Rain Curtain™ nozzles maximize performance and coverage. A multi-function wiper seal and tapered riser keep the stem clear of debris, providing long-term protection. Plus, heavy-duty construction makes the Falcon 6504 one of the toughest rotors in the field. Available in full- and part-circle models with optional stainless steel riser, the Falcon 6504 is ideal for large turf sites such as parks, athletic fields, cemeteries, schools and commercial sites with spacing up to 65 feet (19,8 m).

Features and Benefits:

• Stainless steel riser option helps deter vandalism on public turf areas.
• Five-year trade warranty..
• Easy arc adjustment (part-circle model) through top of rotor from 40° to 360°. No special tools required.
• Water-lubricated gear drive for reliable, durable rotation.
• Heavy-duty, stainless steel retract spring ensures positive pop-down.
• Standard black rubber cover or optional purple rubber cover for non-potable water.
• Removable Seal-A-Matic™ (SAM) check device prevents puddling and erosion caused by low-head drainage.
• Eight color-coded Rain Curtain™ nozzles offer greater design flexibility.
• Patented Rain Curtain™ nozzles have three ports for optimal long-range, mid-range, and close-in watering, for green grass even in the heat of summer.
• Nozzles are interchangeable from the front with no special tools.
• Self-adjusting stator does not require replacement when changing nozzles.
• Radius adjustment screw allows radius reduction up to 25% without changing nozzles.
• Small 2″ (5,1 cm) exposed diameter reduces possibility of injury in play areas.
• Patented, pressure-activated wiper seal and tapered riser stem on both plastic and stainless steel models protect internals from debris to ensure positive pop-up and retraction.
• 4″ (10,2 cm) pop-up height to center line of nozzle clears taller turfgrass.
• Stainless steel trip gears ensure long-term durability.
• Optional rubber collar for added safety on playing fields.
• High speed model completes full rotation in approximately one minute for quick wet-down of clay tennis courts and sports turf infield areas.
• Falcon rotors can be ordered from the factory with nozzles pre-installed in case quantities as a special order.

Models:

• F4-FC: Full-circle
• F4-PC: Part-circle
• F4-FC-NP: Full-circle, non-potable cover
• F4-PC-NP: Part-circle, non-potable cover
• F4-FC-SS: Full-circle, stainless steel
• F4-PC-SS: Part-circle, stainless steel
• F4-FC-SS-NP: Full-circle, stainless steel, non-potable cover
• F4-PC-SS-NP: Part-circle, stainless steel, non-potable cover
• F4-FC-SS-HS: Full-circle, stainless steel, high speed
• F4-PC-SS-HS: Part-circle, stainless steel, high speed
  Note: All models available with BSP threads.

Specifications:

• Precipitation Rate: 0.37 to 1.14 inches per hour (9 to 29 mm/h)
• Radius: 39 to 65 feet (11,9 to 19,8 m)
• Pressure: 30 to 90 psi (2,1 to 6,2 Bars)
• Flow: 2.9 to 21.7 GPM (0,66 to 4,93 m³/h; 0,18 to 1,37 l/s)
• 1″ (26/34) female NPT or BSP threaded inlet
• SAM check device holds up to 10 feet (3,1 m) of elevation change
• Rain Curtain nozzles: 04-black; 06-light blue; 08-dark green; 10-gray; 12-beige; 14-light green; 16-dark brown; 18-dark blue
• Nozzle outlet trajectory is 25°

Dimensions:

• Overall height: 8 1/2″ (21,6 cm)
• Pop-up height: 4″ (10,2 cm)
• Exposed surface diameter: 2″ (5,1 cm)
  Note: Pop-up height is measured from cover to center of nozzle. Overall body height is measured popped down.

Rain Bird® 5500 Series Rotors

Bigger. Better. Built to Last.

Rain Bird® 5500 Series Rotors are built to withstand the harsh conditions and vandalism present in commercial rotor applications. They have been designed and tested to ensure the high reliability demanded by the market today. The 5500 Series offers the durability and performance of Rain Bird’s best commercial rotors in a package designed to excel in short to midrange applications.

NEW! Short Throw Nozzle Set extends the 5500 Series Rotor performance down to the 17′ radius!

Features

• Five year trade warranty.
• Memory Arc® returns the rotor to its original arc setting.
• Non-strippable drive mechanism prevents damage from vandals.
• Brass reinforcing shaft of the nozzle turret to riser withstands vandal kick.
• Optional stainless steel riser model helps deter vandalism on public turf areas.
• Continuous full and part circle operation in one unit to reduce inventory requirements.
• Easy, wet, dry arc adjustment with slotted screwdriver through top of rotor from 50° to 330° part-circle, 360° non-reversing full-circle.
• Left and right side trips adjustable for ease of installation without turning the case and loosening the pipe connection.
• Seal-A-Matic™ (SAM) check device/riser to help prevent low head drainage.
• Water-lubricated gear drive.
• Rain Curtain™ nozzles for optimal distribution and close-in watering resulting in superior uniformity.
• Nozzles are interchangeable from the front with no special tools.
• Self-adjusting stator allows nozzle replacement with no other adjustments required.
• Heavy duty retract spring ensures positive pop-down.
• Standard black rubber cover
• Optional purple rubber cover for nonpotable applications

Operating Range

• Precipitation Rate: 0.21 to 1.48 in/hr (6,3 to 33,8 mm/h)
• Radius: 17 to 55 feet (5,2 to 16,8m)
• Pressure: 30 to 90 psi (2,1 to 6,2 Bars)
• Flow: 1.2 to 15.5 gpm (0,32 to 3,52 m³/h; 4,52 to 58,66 l/m)

Specifications

• 3/4″ (20/27) NPT or BSP female threaded inlet
• SAM check device holds up to 10 feet (3,1 m) of head
• Rain Curtain nozzles:
  2.0 – Orange
  3.0 – Red
  4.0 – Black
  5.0 – Yellow
  6.0 – Light Blue
  8.0 – Dark Green
  10.0 – Grey
  12.0 – Beige
  Short Throw Nozzle Tree (18S, 22S, 26S, 30S) – Aqua
• Nozzle outlet trajectory is 22°

Dimensions

• Exposed diameter: 1 3/4″ (4,4 cm)
• Overall diameter: 2 3/4″ (7,0 cm)
• Overall height: 9 1/4″ (23,5 cm)
• Pop-up height: 5″ (12,7 cm)
  Note: Pop-up height is measured from cover to the primary nozzle port. Overall body height is measured popped down.

Models

• 5505: 3/4″ NPT female threaded inlet (5″ plastic riser stem)
• 5505-SS: 3/4″ NPT female threaded inlet (5″ stainless steel covered riser stem)
• 5512: 3/4″ NPT female threaded inlet (12″ plastic riser stem)

7005 Rotor

Full- or Part-Circle Rotor Pop-Up Sprinklers

Primary Applications:

The Rain Bird® 7005 Rotor is built rugged to withstand the harsh conditions and vandalism present in commercial rotor applications. It has been designed and tested to ensure the high reliability demanded by the market today. With its extensive customer identified features, it is versatile enough to fit all applications.

Features and Benefits:

• Five year trade warranty.
• Memory Arc® returns the rotor to its original arc setting.
• Non-strippable drive mechanism prevents damage from vandals.
• Brass reinforcing shaft of the nozzle turret to riser withstands vandal kick.
• Optional stainless steel riser model helps deter vandalism on public turf areas.
• Full and part circle operation in one unit to reduce inventory requirements.
• Easy, wet, dry arc adjustment with slotted screwdriver through top of rotor from 50° to 330° part-circle, 360° non-reversing full-circle.
• Left and right side trips adjustable for ease of installation without turning the case and loosening the pipe connection.
• Seal-A-Matic™ (SAM) check device/riser to help prevent low head drainage.
• Water-lubricated gear drive.
• Rain Curtain™ nozzles for optimal distribution and close-in watering resulting in superior uniformity.
• Nozzles are interchangeable from the front with no special tools.
• Self-adjusting turbine stator allows nozzle replacement with no other adjustments required.
• Heavy duty retract spring ensures positive pop-down.
• Standard black rubber cover
• Optional Purple rubber cover for nonpotable applications

Models:

• 7005: 1″ NPT female threaded inlet (plastic riser stem)
• 7005-SS: 1″ NPT female threaded inlet (stainless steel covered riser stem)
• Optional rubber collar (black)
• Optional non-potable rubber collar (purple)

*Note: All models available with BSP threads.

Specifications:

• Radius: 39 to 71 feet (11,9 to 21,7 m)
• Pressure: 50 to 90 PSI (3,5 to 6,2 Bars)
• Flow: 3.8 to 22.2 GPM (0,86 to 5,04 m³/h; 0,24 to 1,40 l/s)
• 1″ (26/34) female NPT or BSP threaded inlet
• SAM check device holds up to 10 feet (3,1 m) of elevation change
• Rain Curtain nozzles: 04-black; 06-light blue; 08-dark green; 10-gray; 12-beige; 14-light green; 16-dark brown; 18-dark blue
• Nozzle outlet trajectory is 25°

Dimensions:

• Exposed diameter: 1 7/8″ (4,8 cm)
• Overall diameter: 3 1/8″ (7,9 cm)
• Overall height: 10 1/8″ (25,7 cm)
• Pop-up height: 5″ (12,7 cm)

Note: Pop-up height is measured from cover to center of primary nozzle port. Overall body height is measured popped down.

8005 Rotor

Bigger, Better, Built to Last

The Rain Bird® 8005 Rotor is built rugged to withstand the harsh conditions and vandalism present in commercial rotor applications. It has been designed and tested to ensure the high reliability demanded by the market today. Its extensive customer identified features and 80 foot radius make it ideal for sportsfields, parks and other large turf applications.

Features and Benefits:

• Five year trade warranty.
• Memory Arc® returns the rotor to its original arc setting.
• Non-strippable drive mechanism prevents damage from vandals.
• Brass reinforcing shaft of the nozzle turret to riser withstands vandal kick.
• Optional stainless steel riser model helps deter vandalism on public turf areas.
• Full and part circle operation in one unit to reduce inventory requirements.
• Easy, wet, dry arc adjustment with slotted screwdriver through top of rotor from 50° to 330° part-circle, 360° non-reversing full-circle.
• Left and right side trips adjustable for ease of installation without turning the case and loosening the pipe connection.
• Seal-A-Matic™ (SAM) check device/riser to help prevent low head drainage.
• Water-lubricated gear drive.
• Rain Curtain™ nozzles for optimal distribution and close-in watering resulting in superior uniformity.
• Nozzles are interchangeable from the front with no special tools.
• Self-adjusting turbine stator allows nozzle replacement with no other adjustments required.
• Heavy duty retract spring ensures positive pop-down.
• Standard rubber cap. (Green)
• Optional Purple rubber cover for nonpotable applications

Models:

• 8005: 1″ NPT female threaded inlet (plastic riser stem).
• 8005-SS: 1″ NPT female threaded inlet (stainless steel covered riser stem).
• Optional rubber collar (black)
• Optional non-potable rubber collar (purple)
  *All models available with BSP threads

Specifications:

• Radius: 57 to 81 feet (17,4 to 24,7 m)
• Pressure: 50 to 100 psi (3,5 to 6,9 Bars)
• Flow: 11.1 to 36.3 GPM (2,54 to 8,24 m³/h; 0,70 to 2,29 l/s)
• 1″ (26/34) female NPT or BSP threaded inlet
• SAM check device holds up to 10 feet (3,1 m) of head
• Rain Curtain nozzles: 12-beige; 14-light green; 16-dark brown; 18-dark blue; 20-red; 22-yellow; 24-orange; 26-white
• Nozzle outlet trajectory is 25°

Dimensions:

• Exposed diameter: 1 7/8″ (4,8 cm)
• Overall diameter: 3 1/8″ (7,9 cm)
• Overall height: 10 1/8″ (25,7 cm)
• Pop-up height: 5″ (12,7 cm)

Note: Pop-up height is measured from cover to center of primary nozzle port. Overall body height is measured popped down.

2045A Maxi-Paw™ / 2045A-SAM

Full- or Part-Circle Impact Rotor Pop-Up Sprinklers

Primary Applications:

The Maxi-Paw’s powerful throw permits maximum spacing and offers superior close-in watering and uniform water distribution. Low pressure loss and an efficient, straight-through flow design conserve energy and are ideal for dirty water applications. The optional Seal-A-Matic™ prevents run-off, puddling, and erosion caused by low head drainage. And most important, it’s rugged and dependable, popping up on schedule again and again because of the multi-function wiper seal. The Maxi-Paw Rotor — a tradition of excellence.

Features and Benefits:

• Proven impact drive.
• Straight-through flow for superior performance in dirty water.
• Five interchangeable, color-coded MPR nozzles with standard trajectory.
• Two interchangeable low angle (LA) nozzles.
• Easy to adjust, easy to service.
• No tools required to change nozzles.
• Heavy-duty plastic case with sturdy, reinforced ribbed design.
• Double-weighted arm for slower rotation and increased distance of throw.
• Self-flushing inner trip with improved inner trip lever.
• Powerful reverse action.
• Adjustable arm spring for low-pressure and low-gallonage operation.
• Energy efficient, low pressure and low-gallonage operation.
• Full-circle or part-circle arc 20° to 340°.
• Precision Jet tube (PJ™) minimizes side splash.
• Hooded bearing for longer life.
• Distance control diffuser pin.
• Multi-function, pressure-activated wiper seal.
• Inlet filter screen and pressure-activated wiper seal protect internal assembly from debris to ensure positive pop-up and retraction.
• Combination 1/2″ (15/21) or 3/4″ (20/27) bottom inlet.
• Heavy-duty, stainless steel retract spring assures positive sprinkler pop-down.
• FP trip for full- or part-circle operation.
• Side or combination bottom inlet for design flexibility.
• Side inlet installation is not recommended in freezing climates.
• Serviceable through the top of the case.
• Optional internal Seal-A-Matic (SAM) prevents puddling and erosion caused by low head drainage and saves water.
• Optional nonpotable cover.
• Three-year professional customer satisfaction policy.

Models:

• 2045A Maxi-Paw
• 2045A Maxi-Paw SAM
• 2045A Maxi-Paw NP
• 2045A Maxi-Paw SAM NP

Specifications:

• Precipitation Rate: 0.28 to 1.17 inches per hour (7 to 30 mm/h)
• Radius: 22 to 45 feet (6,7 to 13,7 m)
• Radius with Radius Reduction Screw: 18 ft (5,4 m)
• Pressure: 25 to 60 psi (1,7 to 4,1 Bars)
• Flow: 1.5 to 8.4 GPM (0,34 to 1,91 m³/h; 0,9 to 0,53 l/s)
• Combination 1/2″ (15/21) or 3/4″ (20/27) FPT bottom inlet
  1/2″ (15/21) FPT side inlet
• Nozzles: 06-red; 07-black; 08-blue; 10-yellow; 12-beige
• Low angle (LA) nozzles: 07 LA-black; 10 LA-yellow
• Nozzle outlet trajectory is 23° for 06, 07, 08, 10, and 12 nozzles.
• LA nozzle outlet trajectory is 11°.

Available Nozzles:

• Standard trajectory
  06, 07, 08, 10, 12
• Low Angle
  07LA, 10LA

Dimensions:

• Overall height: 9 3/10″ (23,6 cm)
• Pop-up height: 3″ (7,6 cm)
• Exposed surface diameter: 5″ (12,7 cm)

Rain Bird® STPi Series

Simple-to-Program Irrigation Controllers

Rain Bird’s Simple-to-Program (STPi) Controllers are the easiest controllers in the irrigation industry to program and operate. In fact, the STPi controller is so easy to operate you won’t even need to read the instructions.

Application

The STPi Controller is an indoor controller that has 4, 6 or 9 zone capability. The STPi Controller allows the user to simply enter a custom irrigation schedule for each zone that matches the plants specific irrigation needs.

Outstanding Results

Simple to use “At-a-Glance” programming allows you to see all of the irrigation schedule information for each specific zone at the same time on the controller.

• Independent zone control gives you the flexibility to easily accommodate the diverse watering needs of each zone.
• The STPi controller allows you to use multiple start times per day on an individual zone basis, helping you maintain a healthier lawn and garden.
• The Adjust Water feature enables you to easily increase or decrease the irrigation schedule as needed.
• In the event of a prolonged rain, you can easily suspend the irrigation schedule up to 72 hours using the controller’s Rain Delay feature.
• The Water Now feature allows you to simply apply additional water to irrigate a zone without impacting that zone’s previously set schedule.
• To help manage water restrictions, the controller can be set up to only water on specific days of the week or “odd or even” days.
• The current date and time, as well as the irrigation schedule are saved in the event of a power outage due to the controller’s non-volatile memory.

Models

• STP-400i: 4 zone indoor
• STP-600i: 6 zone indoor
• STP-900i: 9 zone indoor

Operating Specifications

Zone Timing:

• 0 – 240 minutes in one minute increments;
• 0 – 480 minutes with Adjust Water feature activated

Start Times:

• Up to 4 start times (15 minute increments) can be assigned to each zone
• Overlapping start times will stack to prevent two zones from operating concurrently

Day Schedule:

• Each zone can water on any day combination (7 day week) or in ODD or EVEN day mode

Rain Delay:

• The entire irrigation schedule can be suspended up to 72 hours (12 hour increments)

Water Adjust:

• The irrigation schedule for the entire controller can be increased by 100% or decreased up to 90% (10% increments)

Electrical Specifications

Input Required:

• 117VAC, 60Hz

Output:

• 24VAC, .65A

Surge Protection:

• Primary input side has built-in MOV (metal oxide varistor) to protect micro-circuitry
• Output side has 1 built-in MOV for each station

Power Outage Protection:

• A lithium battery saves date and time
• Non-volatile memory saves all program information

Valve Capacity:

• One 24VAC, 7VA solenoid per station plus a master valve

Dimensions

• Width: 7″
• Height: 6″
• Depth: 1 1/4″

STPi User Manual

Rain Bird® ESP-TM Series

Dual Program Hybrid Irrigation Controllers

Primary Applications:

Incorporating all the proven features of the ESP Series, the ESP-TM series of hybrid irrigation controllers is a prime example of making a good thing better. With their slim line cabinets, ESP-TM irrigation controllers are as attractive to look at as they are simple to use.

And, they boast a number of water-saving features simply not found on competitively priced units. Dual programming eliminates over watering one area in order to maintain another. Watering time flexibility is further enhanced by two-, three- and five-day fixed watering cycles or a seven-day variable cycle. Best of all, water budgeting can alter all watering times from 10 to 200 percent with just a single touch.

The ESP-TM Series from Rain Bird. Simplicity at its finest.

Features and Benefits:

• ESP: Extra-Simple Programming
• Two independent programs (A and B)
• “Flip Strip” terminal strips permits valve wire hookup without screws.
• Wiring skirt for clean looking, professional installation.
• System water budgeting makes seasonal adjustments quick and easy.
• Precise station timing in 1-minute increments.
• Programmable day-of-week watering schedule.
• Independent dual programming.
• Easy-to-understand AM/PM clock.
• Self-prompting alphanumeric liquid crystal display (LCD)
• External plug-in style transformer
• Slim, indoor cabinet.
• Manual start/advance capability for semi-automatic operation and system testing.
• Mounting screws provided for convenient installation
• Large, high contrast LCD

Models:

• ESP-4TM: 4 stations
• ESP-6TM: 6 stations
• ESP-8TM: 8 stations

Specifications:

• Station timing: 0-99 minutes (in 1-minute increments);
  0-198 minutes with water budgeting
• Automatic starts: 3 per day for each program (6 per day when using dual program capability)
• Programming schedule: 2-, 3-, or 5-day fixed cycle or 7-day variable cycle
• Water budgeting: 10-200% in 10% increments
• Input required:
  117VAC, 60Hz
• Output:
  24VAC, 0.65A
• Overload fuse: (spare fuse provided in access cover)
  ESP-TM: 0.5A
• Surge protection: Primary input side has built-in MOV (metal oxide varistor) to protect microcircuitry; output side has one built-in MOV for each valve station
• Battery backup: A 3V lithium coin cell battery maintains program memory up to several months and keeps timing accuracy during a power outage (battery included with controller)
• Default program: After prolonged power interruption, each station waters 10 minutes per cycle beginning 8 hours after power resumes – once per day for the 7-day custom cycle or on the first day of the 2-, 3- or 5-day fixed cycle
• Multi-valve station capacity:
  One 24VAC, 7VA solenoid valve per station, plus a master valve

Dimensions:

• Width: 7″ (17,8 cm)
• Height: 8 1/4″ (21,0 cm)
• Depth: 2 1/4″ (5,7 cm)

ESP-TM User Manual (2009 & Later)

ESP-TM User Manual (2008 & Earlier)

User Manual

ESP-LX Modular Controller

Smart Features. Smart Cartridges.
Smart Choice.

What does Rain Bird’s ESP-LX Modular have that other modular controllers don’t?

Smart Features.

Rain Bird is taking the convenience of the modular controller a step further with the ESP-LX Modular. Its Smart Features were designed to free you from unnecessary service calls and save you time on installation.

Here’s a scenario. The season is changing from Spring to Summer. The weather is getting warmer and that means adjusting your controllers to increase watering levels. With competing modular controllers you would have to drive out to each site and make adjustments manually.

Not with Rain Bird’s ESP-LX Modular. One of our Smart Features is Automatic Seasonal Adjust, which lets you program water adjustments by month for the entire year, and it makes the changes automatically. The result? More time to focus on profitable aspects of your business.

Continue reading to learn more about other Smart Features that set the Rain Bird ESP-LX Modular apart, including the Contractor Default backup program and Program Review.

Contractor Default™

Create a customized default program that can be recalled up to 90 days in the future. This allows a temporary schedule to be created for new seed or a fast fix.

Extra Simple Programming (ESP)

Make programming a snap, with a large easy-to-read display plus quick-programming features such as Rain Bird’s exclusive Program Review that shows more station settings at once so you can confirm your program faster.

Automatic Seasonal Adjust

Program seasonal watering adjustments for the entire year that can take effect automatically. Adjust by month or program number.

Configurable Station Count

The ESP-LX Modular is configurable up to 32 stations. It has four bays that are capable of using either 4-station or 8-station modules.

Flexible Programming Options:

• Cycle+Soak™
• Programmable Valve Delay
• Sensor Override by Station
• Master Valve by Station
• Calendar Day Off
• Total Program and Valve Run Times

Reliable Surge Protection

The ESP-LX Modular is constructed with heavy duty surge protection standards to withstand electrical surges and lightning.

Enhanced Diagnostic Feedback™ with RASTER™ Wiring Test

Quickly diagnose field wiring and solenoid problems. The external light and display alerts users of conditions that may disrupt irrigation schedules.

Program Protection

Store irrigation schedule in non-volatile memory for up to 100 years.

Removable Battery-Programmable Panel

For easy programming prior to installation.

Multi-lingual Interface

Features English, Spanish, French, German, Italian, Portuguese, and Chinese.

Lithium Battery

Our battery lasts ten full years, saving all user settings so there is no need to return to the jobsite after a power outage.

Dedicated Sensor Terminal

with 24 VAC Power Connection.

Smart Cartridges

ET Manager Cartridge

Make your controller weather-smart. The most accurate weather-smart device of its kind is now available as a cartridge for the ESP-LX Modular. Using real-time weather data from local precision weather stations, the ET Manager adjusts watering schedules to save 30-50% of water usage. It’s controlled entirely within the ESP-LX interface so there’s no need to program two separate devices.

(ET Manager Cartridge receives weather data via radio broadcasts. Radio broadcasts are available in most parts of the USA and Canada. Please check www.rainbird.com/wrsp for signal availability.)

IQ Cartridge

Gain remote control from your PC. An IQ Cartridge lets you do anything you could do standing at the controller from your personal computer, including manual operation, program adjustment, and even controlling the dial and switch settings. It is the perfect tool to save trips to the job site for the Landscape Maintenance Contractor, Property Manager, or Public Agency managing multiple, single irrigation controller sites.

Smart Choice

Compared with competing products, the ESP-LX is loaded with features that will save you time and money. This comparison shows why the ESP-LX is the smart choice for your next installation.

ESP-LX Modular Controller Models

• ESPLXMI: ESP-LX Modular Controller, 8-Station Indoor, 120 VAC
• ESPLXM: ESP-LX Modular Controller, 8-Station Outdoor, 120 VAC
• ESPLXMSM4: Additional 4-Station Module
• ESPLXMSM8: Additional 8-Station Module

Mounting Equipment

• LXMM: ESPLXM Metal Cabinet
• LXMMPED: ESPLXM Metal Pedestal*

Both cabinet and pedestal are required for pedestal mounting.

Make Your Controller Weather-Smart1,2

• ETM-LXM: ET Manager Cartridge
• ETM-RG: Rain Tipping Gauge
• ETM-RMK: ET Receiver Remote Mounting Kit
• ETM-PS: ET Manager Programming Software

1 The ESP-LX Modular Controller can hold only one Smart Cartridge. You must choose either the ET Manager Cartridge or the IQ Cartridge, not both.

2 ET Manager Cartridge receives weather data via radio broadcasts. Radio broadcasts are available in most parts of the USA and Canada. Please check www.rainbird.com/wrsp for signal availability.

Gain Remote Control from Your PC

• U-DTC-LXM-PR: IQ Upgrade Kit, Phone+RS232 Communication
• U-DTC-LXM-R: IQ Upgrade Kit, RS232 Only Communication
• IQ-STD-CD: IQ Central Control Software, 250 Satellite Controllers Capacity
• IQ-START-CD: IQ Central Control Software, 5 Satellite Controllers Capacity

Dimensions

• Width: 14.32 in. (36,4 cm)
• Height: 12.69 in. (32,2 cm)
• Depth: 5.50 in. (14,0 cm)

Electrical Specifications

• Input required: 120 VAC ± 10%, 60Hz
  (International models: 230 VAC ± 10%, 50Hz; Australian Models: 240 VAC ± 10%, 50Hz)
• Output: 26.5 VAC 1.9A
• Power back-up: Lithium coin-cell battery maintains time and date while nonvolatile memory maintains the schedule
• Multi-valve station capacity: Up to two 24 VAC, 7VA solenoid valves per station plus a master valve

Installation / User Manual