Hunter SRC Plus Controller

Simple. Convenient. Economical. The versatile controller that delivers Hunter quality to smaller sites.

Sophisticated technology and built-in convenience isn’t limited to just the most expensive products. The SRC Plus controller offers a proven track record of Hunter quality and reliability, as well as some of the features you’d assume might only be available on high-priced units. The SRC offers dial programming and a full three programs, each with four start times, plus such conveniences as a built-in 365-day calendar and a rain sensor bypass circuit–just the right features for the needs of smaller landscapes. Available in either 6- or 9-station models, the SRC is housed in a rugged cabinet that offers a polished, professional look. For economy, simplicity, and dependability…you won’t find a better value.

Dial programming
Easy program entry for installers and end-users

3 programs with multiple start times
Accommodates repeat watering requirements, morning, afternoon and evening

Large LCD display for simplified programming
Easy to read for schedule review and entry

365-day calendar clock
Accommodates odd/even watering restrictions, maximum flexibility

Rain sensor bypass
Quick override of rain sensor, no separate switch required

Non-volatile memory
Holds programs indefinitely, excellent insurance against unreliable power

Superior surge protection and self diagnostic short circuit protection
No fuses to worry about

Remote control ready
Supplied with connection for SRR and ICR remote controls

SRC Plus MODELS
SRC-600i – 6-station, Indoor Model with 120 VAC Plug-in Transformer
SRC-900i – 9-station, Indoor Model with 120 VAC Plug-in Transformer
SRC-601i – 6-station, Indoor Model without Plug-in Transformer
SRC-901i – 9-station, Indoor Model without Plug-in Transformer

 DIMENSIONS
• SRC Plus: 8 1/4″ H x 8 1/2″ W x 2 1/4″ D (21 cm H x 22 cm W x 6 cm D)

SPECIFICATIONS & FEATURES
• Station run time: 0-99 minutes in 1-minute increments
• Start times: 4 per day, per program, for up to 12 daily starts
• Day schedule: 7-day calendar or true odd-even programming
with 365-day calendar clock
• AM/PM or 24 hour clock option
• Start time stacking
• One button manual start and advance
• Transformer input: 120VAC, 60 Hz (transformer not included with export units)
• Transformer output: 24VAC, 0.75A
• Station output: 24VAC, 0.35A per station
• Maximum total output: 24VAC, 0.7A, includes master valve circuit
• Battery: Not required for program backup.
9 volt alkaline battery may be used to program controller in absence of AC power.
• Non-volatile memory for program data (no battery required to maintain program)
• Master valve output: 24VAC, 0.35A
• Surge protection: primary MOV-type
• Rain sensor override compatible with most major brands
• Test program feature allows for quick system checks.
• Preset test cycle on program “C”
• UL listed
• Central control compatible with Hunter IMMS™ system
• Hunter Quick Check™ helps troubleshoot field wiring problems
• Electronic Short Circuit Protection; automatically detects and skips shorted stations,
no fuses to replace
 

Hunter SRC-600i Owners Manual

Pro-C Controller

A complete family of modular, full-featured residential and light commercial controllers.

No need to bring along a variety of different-sized controllers to see which one is best for the job. With its ability to customize to the particular size you need (from 3 to 15 stations), the Pro-C will always be the right choice. A modular system also makes inventory a breeze–there are only three different units to stock (indoor cabinets, outdoor cabinets and station modules). But, modularity isn’t all this controller has to offer, with great features such as three programs with multiple start times, independent day scheduling options, “one touch” manual start and rapid advance, a programmable event day off, robust heavy-duty locking plastic cabinet, and superior surge protection. Pro-C: delivering maximum flexibility for landscapes that require a minimal number of stations.

Versatile modular design
Simplified inventory management; easily customize unit to desired number of stations U.S. Patent #’s 6,840,460 & 6,842,667

Large LCD display for simplified programming
Easy to read for schedule review and entry

Three programs (A ,B, C) with multiple start times
Independent programming handles many different watering requirements

Choice of independent day scheduling options
Days of the week, odd/even or 31-day interval for maximum flexibility

Global water budget/seasonal adjustment
Easily change run time of all zones from 10% to 150%

Non-volatile memory
Holds programs indefinitely; excellent insurance against unreliable power

Superior surge protection and self-diagnostic short circuit protection
Microcircuits are protected from electrical spikes, no fuses to worry about

Remote control ready
Supplied with connection for SRR and ICR remote controls

Pro-C MODELS
PC-300i – 3-station base unit controller,
indoor model, plug-in transformer, expands to 15 stations
PC-300 – 3-station base unit controller,
outdoor model, internal transformer, expands to 15 stations
PC-301i – International model 3-station base model
indoor plastic cabinet with plug-in transformer, expands to 15 stations
PC-301 –International model 3-station base unit controller,
outdoor model, internal transformer, expands to 15 stations
PCM-300 – 3-station plug-in module for use with any PC controller model
PCM-900 – 9-station plug-in module for use with any PC controller model
(expands Pro-C station capability to 15 stations with 1 PCM-300 installed)

DIMENSIONS
• Indoor Model: 8.3″ H x 9.6″ W x 3.7″ D
(21.1 cm H x 24.4 cm W x 9.4 cm D)
• Outdoor Model: 8.9″ H x 9.9″ W x 4.3″ D
(22.6 cm H x 25.1 cm W x 10.9 cm D)

SPECIFICATIONS & FEATURES
• Outdoor models, 120VAC transformer with internal junction box
• Indoor model, 120VAC three prong plug-in transformer
• Station output 24VAC .56 Amps
• Transformer output 24VAC 1.0 Amps
• Capable of operating equivalent of 3 solenoids simultaneously
• Operating Temperature: 0 to 150˚ F
• NEMA rated outdoor cabinet
• CE/UL Listed
• 4 start times per program for repeat watering needs
• Up to six hours run time on each station
• Automated chronological ordering of start times/start time stacking
• 365-day calendar with leap year intelligence
• Programmable event day off allows specific day(s) to be designated as always “off”
• Rain Sensor bypass switch compatible with microswitch based sensors, displays when sensor is active
• Programmable delay between stations of zero seconds to 4 hours for well recovery or slow-closing valves
• Programmable rain delay for 1 to 7 days
• Compatible with Hunter’s SRR and ICR remote control system
• Programmable pump/master valve circuit by station
• Hunter Quick Check™ helps troubleshoot field wiring problems
• Test program feature allows for quick system checks
• Central control compatible with Hunter IMMS™ system
• Automatic module recognition; automatically identifies stations when modules are installed or removed
• Non-volatile memory backs up watering programs and current date and time
• Electronic short circuit protection; detects and skips shorted stations, no fuse to replace

EC Controller

A proven track record combined with an economical price make this controller ideal for tract housing installations.

A masterpiece of modern technology that brings together the most desirable features, bundles them in a small, attractive package, and makes everything simple and easy to use. The new EC is designed for those who don’t want a big controller, but do want one with all the features that meet their irrigation requirements. Available in 2-, 4- and 6-station indoor and outdoor models, the EC offers all the features you would expect to find only on more expensive units – on-screen water budgeting for seasonal adjustment, interval watering options, station delay, one-touch manual start and advance and non-volatile memory (plus, it boasts a sturdy protective cabinet that includes a lockable case). Best of all, no controller is simpler to install and program. Both the faceplate and the easy-to-read LCD display feature internationally-recognized icons that make programming a snap. The EC controller. Just the latest example of how Hunter makes advanced engineering simple.

Intuitive dial programming

Enhanced dial design features easy grip, effortless program entry for installers and end-users

Seasonal adjustment (from 0% to 150%)

Easy on-screen adjustment (in 10% increments) alters the amount of watering to accommodate weather changes

3 programs with multiple start times

Accommodates repeat watering requirements, morning, afternoon and evening

Large LCD display with interactive icons

At-a-glance viewing makes programming easy, regardless of language

Choice of independent day scheduling options

For maximum watering flexibility (select days of the week or interval up to 31 days)

Weather sensor compatible

Incorporates hook-up capability to rain, moisture, temperature or wind sensors

Non-volatile memory

Excellent insurance against unreliable power; retains current time, day and program data

EC MODELS

EC-200i/201i – 2-station indoor controller

EC-400i/401i – 4-station indoor controller

EC-400/401 – 4-station outdoor controller

EC-600i/601i – 6-station indoor controller

EC-600/601 – 6-station outdoor controller

 DIMENSIONS

• Indoor Model: 5 1/2″ H x 5 3/4″ W x 2″ D

(13.3 cm H x 14.6 cm W x 5 cm D)

• Outdoor Model: 8 5/8″ H x 7″ W x 3 3/4″ D

(22 cm H x 17.8 cm W x 9.5 cm D)

SPECIFICATIONS & FEATURES

• 3 programs: A, B, C

• Start times: 4 per day, per program, for up to 12 daily starts

• Station run time: 0 minutes to 4 hours in 1-minute increments

• Day schedule: 7-day calendar or interval (1-31 day) watering

• AM/PM or 24-hour clock option

• Start time stacking

• One-button manual start and advance

• Seasonal adjust: 10-150% in 10% increments

• Transformer input: 110VAC, 60 Hz

• Transformer output: 24VAC, 0.625A

• Station output: 24VAC, 0.28A per station (maximum 1 valve)

• Maximum total output: 24VAC, 0.56A includes master valve circuit

• UL listed

• Battery: Not required for program backup.

9 volt alkaline battery may be used to program controller in absence of AC power

• Non-volatile memory for program data (no battery required to maintain program)

• Master valve output: 24VAC, 0.28A

• Electronic short circuit protection

• Surge protection: Primary MOV-type

• Controller will track time for 4 weeks in the event of a power outage (even without a 9 volt battery)

• Rain sensor override by manual operation

• Hunter Quick Check™ helps troubleshoot field wiring problems

5000/5000 Plus Series Rotors

The Next Evolution in Rotor Performance

• Greener grass with less water – Rain Curtain™ nozzles deliver superior uniformity
• Even greater water savings with optional in-stem pressure regulation (PRS)
• Faster to install with matched precipitation rate using MPR nozzle set

Features

• Faster maintenance with a new self-cleaning arc adjustment screw
• 5000, 5000 Plus and 5000 Plus PRS Series Rotors are available in 4”, 6”, 12”, Shrub, and Stainless Steel (5000 Plus/5000 Plus PRS 4” & 6” only) models
• Standard rubber cover for extra protection. 5000 Plus/5000 Plus PRS feature a green cover while the 5000 features a black cover
• Heavy-duty cover assembly for extra durability in residential or commercial applications
• Rain Curtain™ Nozzles
• The 5000 Plus features a Flow Shut-Off device to stop the flow of water to a particular head while the system is still in operation.
• Slip clutch mechanism for quick adjustment on installation
• Heavy-duty retract spring assures positive pop-down
• Tree of nozzles including four low angle (Angle of Trajectory 10°) and eight standard angle Rain Curtain™ Nozzles (Angle of Trajectory 25°) provides 25 to 50 (7,6 to 15,2 m) distance of throw
• Award-winning MPR nozzle set simplifies design and installation by providing matched precipitation from 25’ to 35’ (7,6 to 10,7 m) (see page 52)
• Top-adjust arc adjustment requiring only a flat-blade screwdriver
• Five-year trade warranty
• 40 – 360° arc rotation and reversing full circle rotation in one. (A nonreversing full circle only unit is also available)
• Radius adjustment screw allows up to 25% radius reduction without changing nozzles
• True 4” (10 cm), 6” (15,2 cm) and 12” (30,5 cm) pop-up (measured from the cover to the nozzle)
• Pressure-activated multi-function wiper seal protects internals from debris and assures positive pop-up and retraction
• Reinforced flow path for additional side load strength
• Additional O-rings and seals for extra protection in “gritty” water
• Optional stainless steel riser helps deter vandalism on public turf areas (4” and 6” 5000 Plus/5000 Plus PRS only)
• Optional pre-installed Rain Curtain™ nozzle on most popular nozzles
• Optional Seal-A-Matic (SAM)™ check valve holds up to 7 feet (2,1 m) of elevation change, to prevent puddling and erosion caused by low head drainage
• Optional non-potable purple cover for easy identification of reclaimed water

Operating Range

• Precipitation rate: 0.20 to 1.01 inches per hour (5 to 26 mm/h)
• Radius: 25 to 50 feet (7,6 to 15,2 m)
• Radius may be reduced up to 25% with radius reduction screw
• Pressure: 25-65 psi (1,7 to 4,5 bar)
• Flow Rate: 0.73 to 9.63 gpm (4,2 to 36,6 l/m)

Specifications

• 3⁄4” (20/27) NPT female bottom threaded inlet
• Reversing full and part circle adjustment 40° – 360°
• Full circle only adjustment 360°

Dimensions

• Pop-up height: Shrub; 4” (10,2 cm); 6” (15,2 cm); 12” (30,5 cm)
• Overall body height: Shrub: 7 3⁄4” (19,7cm) 4”: 7 3⁄8” (18, 5 cm); 6”: 9 5⁄8” (24,5 cm); 12”: 16 7⁄8” (42,9 cm)
• Exposed surface diameter: 1 5⁄8” (4,1 cm)

Note: Pop-up height measured from the cover to the nozzle. Overall body height is measured popped down

Optional PRS Feature

• In-stem pressure regulator (PRS) reduces operating pressure to 45 psi (3,1 bar) for optimal nozzle performance
• PRS saves water by:
  - Eliminating head-to-head pressure variations
  - Eliminating misting due to high pressure
  - Improving nozzle distribution uniformity by operating the nozzle at optimum pressure
• Maintenance-free design can be easily retrofitted into existing 5000/5000 Plus, T-Bird™ and Hunter® PGP™ (using UPG model) rotor cases without digging up the entire body
• Pressure: 25-75 psi (1,7 to 5,2 bar)

Models

Part-Circle units (PC) are adjustable from 40 –360 degrees.
Full-Circle units (FC) are 360 degrees only.

• 5004-(PC or FC)-(SAM)-(NP)
• 5006-(PC or FC)-(SAM)-(NP)
• 5012-(PC or FC)-(SAM)-(NP)
• 5000-S-PL-(PC or FC)-(SAM)-(R)-(NP) – standard with SAM
• 5004-PL-(PC or FC)-(SAM)-(R)-(NP)-(SS)
• 5006-PL-(PC or FC)-(SAM)-(R)-(NP)-(SS)
• 5012-PL-(PC or FC)-(SAM)-(R)-(NP)

Note: Many models are available with a 2.0 or 3.0 nozzle pre-installed. NP and SS versions come standard with a SAM, PRS available in 5000 Plus

Falcon® 6504

Full- or Part-Circle Rotor Pop-Up Sprinklers

Primary Applications:

With the Falcon 6504 rotor, you can have it all — uncompromising performance, superior distribution, reliability and durability. Rain Curtain™ nozzles maximize performance and coverage. A multi-function wiper seal and tapered riser keep the stem clear of debris, providing long-term protection. Plus, heavy-duty construction makes the Falcon 6504 one of the toughest rotors in the field. Available in full- and part-circle models with optional stainless steel riser, the Falcon 6504 is ideal for large turf sites such as parks, athletic fields, cemeteries, schools and commercial sites with spacing up to 65 feet (19,8 m).

Features and Benefits:

• Stainless steel riser option helps deter vandalism on public turf areas.
• Five-year trade warranty..
• Easy arc adjustment (part-circle model) through top of rotor from 40° to 360°. No special tools required.
• Water-lubricated gear drive for reliable, durable rotation.
• Heavy-duty, stainless steel retract spring ensures positive pop-down.
• Standard black rubber cover or optional purple rubber cover for non-potable water.
• Removable Seal-A-Matic™ (SAM) check device prevents puddling and erosion caused by low-head drainage.
• Eight color-coded Rain Curtain™ nozzles offer greater design flexibility.
• Patented Rain Curtain™ nozzles have three ports for optimal long-range, mid-range, and close-in watering, for green grass even in the heat of summer.
• Nozzles are interchangeable from the front with no special tools.
• Self-adjusting stator does not require replacement when changing nozzles.
• Radius adjustment screw allows radius reduction up to 25% without changing nozzles.
• Small 2″ (5,1 cm) exposed diameter reduces possibility of injury in play areas.
• Patented, pressure-activated wiper seal and tapered riser stem on both plastic and stainless steel models protect internals from debris to ensure positive pop-up and retraction.
• 4″ (10,2 cm) pop-up height to center line of nozzle clears taller turfgrass.
• Stainless steel trip gears ensure long-term durability.
• Optional rubber collar for added safety on playing fields.
• High speed model completes full rotation in approximately one minute for quick wet-down of clay tennis courts and sports turf infield areas.
• Falcon rotors can be ordered from the factory with nozzles pre-installed in case quantities as a special order.

Models:

• F4-FC: Full-circle
• F4-PC: Part-circle
• F4-FC-NP: Full-circle, non-potable cover
• F4-PC-NP: Part-circle, non-potable cover
• F4-FC-SS: Full-circle, stainless steel
• F4-PC-SS: Part-circle, stainless steel
• F4-FC-SS-NP: Full-circle, stainless steel, non-potable cover
• F4-PC-SS-NP: Part-circle, stainless steel, non-potable cover
• F4-FC-SS-HS: Full-circle, stainless steel, high speed
• F4-PC-SS-HS: Part-circle, stainless steel, high speed
  Note: All models available with BSP threads.

Specifications:

• Precipitation Rate: 0.37 to 1.14 inches per hour (9 to 29 mm/h)
• Radius: 39 to 65 feet (11,9 to 19,8 m)
• Pressure: 30 to 90 psi (2,1 to 6,2 Bars)
• Flow: 2.9 to 21.7 GPM (0,66 to 4,93 m³/h; 0,18 to 1,37 l/s)
• 1″ (26/34) female NPT or BSP threaded inlet
• SAM check device holds up to 10 feet (3,1 m) of elevation change
• Rain Curtain nozzles: 04-black; 06-light blue; 08-dark green; 10-gray; 12-beige; 14-light green; 16-dark brown; 18-dark blue
• Nozzle outlet trajectory is 25°

Dimensions:

• Overall height: 8 1/2″ (21,6 cm)
• Pop-up height: 4″ (10,2 cm)
• Exposed surface diameter: 2″ (5,1 cm)
  Note: Pop-up height is measured from cover to center of nozzle. Overall body height is measured popped down.

Rain Bird® 5500 Series Rotors

Bigger. Better. Built to Last.

Rain Bird® 5500 Series Rotors are built to withstand the harsh conditions and vandalism present in commercial rotor applications. They have been designed and tested to ensure the high reliability demanded by the market today. The 5500 Series offers the durability and performance of Rain Bird’s best commercial rotors in a package designed to excel in short to midrange applications.

NEW! Short Throw Nozzle Set extends the 5500 Series Rotor performance down to the 17′ radius!

Features

• Five year trade warranty.
• Memory Arc® returns the rotor to its original arc setting.
• Non-strippable drive mechanism prevents damage from vandals.
• Brass reinforcing shaft of the nozzle turret to riser withstands vandal kick.
• Optional stainless steel riser model helps deter vandalism on public turf areas.
• Continuous full and part circle operation in one unit to reduce inventory requirements.
• Easy, wet, dry arc adjustment with slotted screwdriver through top of rotor from 50° to 330° part-circle, 360° non-reversing full-circle.
• Left and right side trips adjustable for ease of installation without turning the case and loosening the pipe connection.
• Seal-A-Matic™ (SAM) check device/riser to help prevent low head drainage.
• Water-lubricated gear drive.
• Rain Curtain™ nozzles for optimal distribution and close-in watering resulting in superior uniformity.
• Nozzles are interchangeable from the front with no special tools.
• Self-adjusting stator allows nozzle replacement with no other adjustments required.
• Heavy duty retract spring ensures positive pop-down.
• Standard black rubber cover
• Optional purple rubber cover for nonpotable applications

Operating Range

• Precipitation Rate: 0.21 to 1.48 in/hr (6,3 to 33,8 mm/h)
• Radius: 17 to 55 feet (5,2 to 16,8m)
• Pressure: 30 to 90 psi (2,1 to 6,2 Bars)
• Flow: 1.2 to 15.5 gpm (0,32 to 3,52 m³/h; 4,52 to 58,66 l/m)

Specifications

• 3/4″ (20/27) NPT or BSP female threaded inlet
• SAM check device holds up to 10 feet (3,1 m) of head
• Rain Curtain nozzles:
  2.0 – Orange
  3.0 – Red
  4.0 – Black
  5.0 – Yellow
  6.0 – Light Blue
  8.0 – Dark Green
  10.0 – Grey
  12.0 – Beige
  Short Throw Nozzle Tree (18S, 22S, 26S, 30S) – Aqua
• Nozzle outlet trajectory is 22°

Dimensions

• Exposed diameter: 1 3/4″ (4,4 cm)
• Overall diameter: 2 3/4″ (7,0 cm)
• Overall height: 9 1/4″ (23,5 cm)
• Pop-up height: 5″ (12,7 cm)
  Note: Pop-up height is measured from cover to the primary nozzle port. Overall body height is measured popped down.

Models

• 5505: 3/4″ NPT female threaded inlet (5″ plastic riser stem)
• 5505-SS: 3/4″ NPT female threaded inlet (5″ stainless steel covered riser stem)
• 5512: 3/4″ NPT female threaded inlet (12″ plastic riser stem)

7005 Rotor

Full- or Part-Circle Rotor Pop-Up Sprinklers

Primary Applications:

The Rain Bird® 7005 Rotor is built rugged to withstand the harsh conditions and vandalism present in commercial rotor applications. It has been designed and tested to ensure the high reliability demanded by the market today. With its extensive customer identified features, it is versatile enough to fit all applications.

Features and Benefits:

• Five year trade warranty.
• Memory Arc® returns the rotor to its original arc setting.
• Non-strippable drive mechanism prevents damage from vandals.
• Brass reinforcing shaft of the nozzle turret to riser withstands vandal kick.
• Optional stainless steel riser model helps deter vandalism on public turf areas.
• Full and part circle operation in one unit to reduce inventory requirements.
• Easy, wet, dry arc adjustment with slotted screwdriver through top of rotor from 50° to 330° part-circle, 360° non-reversing full-circle.
• Left and right side trips adjustable for ease of installation without turning the case and loosening the pipe connection.
• Seal-A-Matic™ (SAM) check device/riser to help prevent low head drainage.
• Water-lubricated gear drive.
• Rain Curtain™ nozzles for optimal distribution and close-in watering resulting in superior uniformity.
• Nozzles are interchangeable from the front with no special tools.
• Self-adjusting turbine stator allows nozzle replacement with no other adjustments required.
• Heavy duty retract spring ensures positive pop-down.
• Standard black rubber cover
• Optional Purple rubber cover for nonpotable applications

Models:

• 7005: 1″ NPT female threaded inlet (plastic riser stem)
• 7005-SS: 1″ NPT female threaded inlet (stainless steel covered riser stem)
• Optional rubber collar (black)
• Optional non-potable rubber collar (purple)

*Note: All models available with BSP threads.

Specifications:

• Radius: 39 to 71 feet (11,9 to 21,7 m)
• Pressure: 50 to 90 PSI (3,5 to 6,2 Bars)
• Flow: 3.8 to 22.2 GPM (0,86 to 5,04 m³/h; 0,24 to 1,40 l/s)
• 1″ (26/34) female NPT or BSP threaded inlet
• SAM check device holds up to 10 feet (3,1 m) of elevation change
• Rain Curtain nozzles: 04-black; 06-light blue; 08-dark green; 10-gray; 12-beige; 14-light green; 16-dark brown; 18-dark blue
• Nozzle outlet trajectory is 25°

Dimensions:

• Exposed diameter: 1 7/8″ (4,8 cm)
• Overall diameter: 3 1/8″ (7,9 cm)
• Overall height: 10 1/8″ (25,7 cm)
• Pop-up height: 5″ (12,7 cm)

Note: Pop-up height is measured from cover to center of primary nozzle port. Overall body height is measured popped down.

8005 Rotor

Bigger, Better, Built to Last

The Rain Bird® 8005 Rotor is built rugged to withstand the harsh conditions and vandalism present in commercial rotor applications. It has been designed and tested to ensure the high reliability demanded by the market today. Its extensive customer identified features and 80 foot radius make it ideal for sportsfields, parks and other large turf applications.

Features and Benefits:

• Five year trade warranty.
• Memory Arc® returns the rotor to its original arc setting.
• Non-strippable drive mechanism prevents damage from vandals.
• Brass reinforcing shaft of the nozzle turret to riser withstands vandal kick.
• Optional stainless steel riser model helps deter vandalism on public turf areas.
• Full and part circle operation in one unit to reduce inventory requirements.
• Easy, wet, dry arc adjustment with slotted screwdriver through top of rotor from 50° to 330° part-circle, 360° non-reversing full-circle.
• Left and right side trips adjustable for ease of installation without turning the case and loosening the pipe connection.
• Seal-A-Matic™ (SAM) check device/riser to help prevent low head drainage.
• Water-lubricated gear drive.
• Rain Curtain™ nozzles for optimal distribution and close-in watering resulting in superior uniformity.
• Nozzles are interchangeable from the front with no special tools.
• Self-adjusting turbine stator allows nozzle replacement with no other adjustments required.
• Heavy duty retract spring ensures positive pop-down.
• Standard rubber cap. (Green)
• Optional Purple rubber cover for nonpotable applications

Models:

• 8005: 1″ NPT female threaded inlet (plastic riser stem).
• 8005-SS: 1″ NPT female threaded inlet (stainless steel covered riser stem).
• Optional rubber collar (black)
• Optional non-potable rubber collar (purple)
  *All models available with BSP threads

Specifications:

• Radius: 57 to 81 feet (17,4 to 24,7 m)
• Pressure: 50 to 100 psi (3,5 to 6,9 Bars)
• Flow: 11.1 to 36.3 GPM (2,54 to 8,24 m³/h; 0,70 to 2,29 l/s)
• 1″ (26/34) female NPT or BSP threaded inlet
• SAM check device holds up to 10 feet (3,1 m) of head
• Rain Curtain nozzles: 12-beige; 14-light green; 16-dark brown; 18-dark blue; 20-red; 22-yellow; 24-orange; 26-white
• Nozzle outlet trajectory is 25°

Dimensions:

• Exposed diameter: 1 7/8″ (4,8 cm)
• Overall diameter: 3 1/8″ (7,9 cm)
• Overall height: 10 1/8″ (25,7 cm)
• Pop-up height: 5″ (12,7 cm)

Note: Pop-up height is measured from cover to center of primary nozzle port. Overall body height is measured popped down.

2045A Maxi-Paw™ / 2045A-SAM

Full- or Part-Circle Impact Rotor Pop-Up Sprinklers

Primary Applications:

The Maxi-Paw’s powerful throw permits maximum spacing and offers superior close-in watering and uniform water distribution. Low pressure loss and an efficient, straight-through flow design conserve energy and are ideal for dirty water applications. The optional Seal-A-Matic™ prevents run-off, puddling, and erosion caused by low head drainage. And most important, it’s rugged and dependable, popping up on schedule again and again because of the multi-function wiper seal. The Maxi-Paw Rotor — a tradition of excellence.

Features and Benefits:

• Proven impact drive.
• Straight-through flow for superior performance in dirty water.
• Five interchangeable, color-coded MPR nozzles with standard trajectory.
• Two interchangeable low angle (LA) nozzles.
• Easy to adjust, easy to service.
• No tools required to change nozzles.
• Heavy-duty plastic case with sturdy, reinforced ribbed design.
• Double-weighted arm for slower rotation and increased distance of throw.
• Self-flushing inner trip with improved inner trip lever.
• Powerful reverse action.
• Adjustable arm spring for low-pressure and low-gallonage operation.
• Energy efficient, low pressure and low-gallonage operation.
• Full-circle or part-circle arc 20° to 340°.
• Precision Jet tube (PJ™) minimizes side splash.
• Hooded bearing for longer life.
• Distance control diffuser pin.
• Multi-function, pressure-activated wiper seal.
• Inlet filter screen and pressure-activated wiper seal protect internal assembly from debris to ensure positive pop-up and retraction.
• Combination 1/2″ (15/21) or 3/4″ (20/27) bottom inlet.
• Heavy-duty, stainless steel retract spring assures positive sprinkler pop-down.
• FP trip for full- or part-circle operation.
• Side or combination bottom inlet for design flexibility.
• Side inlet installation is not recommended in freezing climates.
• Serviceable through the top of the case.
• Optional internal Seal-A-Matic (SAM) prevents puddling and erosion caused by low head drainage and saves water.
• Optional nonpotable cover.
• Three-year professional customer satisfaction policy.

Models:

• 2045A Maxi-Paw
• 2045A Maxi-Paw SAM
• 2045A Maxi-Paw NP
• 2045A Maxi-Paw SAM NP

Specifications:

• Precipitation Rate: 0.28 to 1.17 inches per hour (7 to 30 mm/h)
• Radius: 22 to 45 feet (6,7 to 13,7 m)
• Radius with Radius Reduction Screw: 18 ft (5,4 m)
• Pressure: 25 to 60 psi (1,7 to 4,1 Bars)
• Flow: 1.5 to 8.4 GPM (0,34 to 1,91 m³/h; 0,9 to 0,53 l/s)
• Combination 1/2″ (15/21) or 3/4″ (20/27) FPT bottom inlet
  1/2″ (15/21) FPT side inlet
• Nozzles: 06-red; 07-black; 08-blue; 10-yellow; 12-beige
• Low angle (LA) nozzles: 07 LA-black; 10 LA-yellow
• Nozzle outlet trajectory is 23° for 06, 07, 08, 10, and 12 nozzles.
• LA nozzle outlet trajectory is 11°.

Available Nozzles:

• Standard trajectory
  06, 07, 08, 10, 12
• Low Angle
  07LA, 10LA

Dimensions:

• Overall height: 9 3/10″ (23,6 cm)
• Pop-up height: 3″ (7,6 cm)
• Exposed surface diameter: 5″ (12,7 cm)

Rain Bird® STPi Series

Simple-to-Program Irrigation Controllers

Rain Bird’s Simple-to-Program (STPi) Controllers are the easiest controllers in the irrigation industry to program and operate. In fact, the STPi controller is so easy to operate you won’t even need to read the instructions.

Application

The STPi Controller is an indoor controller that has 4, 6 or 9 zone capability. The STPi Controller allows the user to simply enter a custom irrigation schedule for each zone that matches the plants specific irrigation needs.

Outstanding Results

Simple to use “At-a-Glance” programming allows you to see all of the irrigation schedule information for each specific zone at the same time on the controller.

• Independent zone control gives you the flexibility to easily accommodate the diverse watering needs of each zone.
• The STPi controller allows you to use multiple start times per day on an individual zone basis, helping you maintain a healthier lawn and garden.
• The Adjust Water feature enables you to easily increase or decrease the irrigation schedule as needed.
• In the event of a prolonged rain, you can easily suspend the irrigation schedule up to 72 hours using the controller’s Rain Delay feature.
• The Water Now feature allows you to simply apply additional water to irrigate a zone without impacting that zone’s previously set schedule.
• To help manage water restrictions, the controller can be set up to only water on specific days of the week or “odd or even” days.
• The current date and time, as well as the irrigation schedule are saved in the event of a power outage due to the controller’s non-volatile memory.

Models

• STP-400i: 4 zone indoor
• STP-600i: 6 zone indoor
• STP-900i: 9 zone indoor

Operating Specifications

Zone Timing:

• 0 – 240 minutes in one minute increments;
• 0 – 480 minutes with Adjust Water feature activated

Start Times:

• Up to 4 start times (15 minute increments) can be assigned to each zone
• Overlapping start times will stack to prevent two zones from operating concurrently

Day Schedule:

• Each zone can water on any day combination (7 day week) or in ODD or EVEN day mode

Rain Delay:

• The entire irrigation schedule can be suspended up to 72 hours (12 hour increments)

Water Adjust:

• The irrigation schedule for the entire controller can be increased by 100% or decreased up to 90% (10% increments)

Electrical Specifications

Input Required:

• 117VAC, 60Hz

Output:

• 24VAC, .65A

Surge Protection:

• Primary input side has built-in MOV (metal oxide varistor) to protect micro-circuitry
• Output side has 1 built-in MOV for each station

Power Outage Protection:

• A lithium battery saves date and time
• Non-volatile memory saves all program information

Valve Capacity:

• One 24VAC, 7VA solenoid per station plus a master valve

Dimensions

• Width: 7″
• Height: 6″
• Depth: 1 1/4″

STPi User Manual