I-10/I-20 Ultra Rotary Sprinkler

The rotor with heavy-duty commercial-grade features that’s equally at home in a residential setting.

If you’ve ever desired the convenience of being able to use just one rotor to cover all of your needs, here it is. Got a small area for which you don’t want to create a separate spray zone? Is a portion of your landscape in sandy soil? Is the landscape a mix of shrub zones and expanses of grass? Does one part of the turf require a higher cut? With all the features on today’s I-20 Ultra (most notably its ability to effectively cover a radius range from 17 up to 47 feet) there’s a single-sprinkler alternative to stocking a variety of rotors and sprays. With over 20 different nozzle choices, the I-20 Ultra rotor can handle the full range of irrigation needs.

Integral rubber cover
Stays put to keep play areas safe

Choice of 22 different nozzles
Allows sprinkler to be custom fitted to all spacings from 18′ to 47′

FloStop® Control
Allows stoppage of flow through an individual head while remainder of system is running

Easy arc adjustment (40° – 360°)
Right at the top of the sprinkler

Continuously improved, water-lubricated gear drive
Backed by over a decade of proven reliability

Extra-strong spring
Reliable retraction every time

Drain check valve for up to 10 feet elevation change
Saves water, reduces liability

Optional Stainless Steel Riser
Added strength for the harshest conditions

I-10/I-20 Ultra MODELS
I-10 – Shrub
I-20 – 4″ Pop-up (10 cm)
I-20-6P – 6″ Pop-up (15 cm)
I-20-HP – 12″ Pop-up (30 cm)DIMENSIONS
• Overall height:
I-10 – 7 3/4″ (20 cm)
I-20 – 7 3/8″ (19 cm)
I-20-6P – 9 7/8″ (25 cm)
I-20-HP – 17″ (43 cm)
• 3/4 ” female inlet NPT
• Exposed diameter: 1 3/4″ (4 cm)OPERATING SPECIFICATIONS
• Discharge rate: .9 to 14.3 gpm (0.20 to 1.86 m3/hr; 3.4 to 31.0 l/min)
• Radius: 17′ to 47′ (5.2 to 14.3 m)
• Recommended pressure range:
40 to 60 psi (2.8 to 4.1 bars; 275 to 413 kPa)
• Operating pressure range: 20 to 100 PSI (1.4 to 6.9 bars; 137 to 689 kPa)
• Precipitation rates:approximately .4″ (10 mm) per hour at 50 psi (3.4 bars; 344 kPa) for spacing from 18′ to 45′ (7.6 to 13.7 m)
• Nozzle trajectory: standard – 25°; low-angle – 13°
• Drain check valve for up to 10′ (3.0 m) elevation changeNote: To ensure optimum nozzle performance, the rotor should be operated in the “Recommended pressure range.” The sprinkler will work normally when used in the “Operating pressure range”, but nozzle performance may be reduced.OPTIONS AVAILABLE
• Reclaimed water cover
• Stainless steel riser (4″ & 6″ I-20 only)
• Factory-installed nozzles (Standard and LA only)

Key to Features:
ADJ = Adjustable Arc without Check Valve
360 = Full-Circle without Check Valve
ADV = Adjustable Arc with Check Valve
36V = Full-Circle with Check Valve
ADS = Adjustable Arc, Stainless Steel Riser, with Check Valve
36S = Full-Circle, Stainless Steel Riser, with Check Valve
ARV = Adjustable Arc, Reclaimed Water, with Check Valve
3RV = Full-Circle, Reclaimed Water, with Check Valve
ARS = Adjustable Arc, Reclaimed Water, Stainless Steel Riser,
with Check Valve
3RS = Full-Circle, Reclaimed Water, Stainless Steel Riser,
with Check Valve