I-60 Rotary Sprinkler

A large turf rotor that meets the demands of systems with lower pressures and smaller budgets.

Facilities with wide expanses of turf require rotors that can cover great distances. But, the farther the rotors are spread apart, the higher the pressure needs to be to cover the throw. With municipal water supplies, more often than not, the pressure is too low for the rotors to work effectively. Instead of the expense of installing a pump to get the pressure up to an operational level, Hunter offers you a more efficient (cost and performance) way. The I-60 lets you space rotors far enough apart, as is desirable in a large landscape such as a city park or community sports complex. Because it is designed to operate under lower pressure, it’s a rotor that makes good economic sense. And, since it uses less water to run, the I-60 also eliminates the need to install larger pipe (another savings for the budget conscious).

Patented Precision Distribution Control™
Assures even coverage at low pressures without the need for a booster pump

6 color-coded nozzles
Truly uniform coverage and fast identification

Stainless-steel riser
Increased durability in harsh soil conditions

Easy arc adjustment (40° – 360°)
Up, down, wet or dry with through the top convenience

Heavy-duty, water-lubricated gear drive
Enduring reliability, year after year

Patented VStat® self adjusting stator
No stator rings required, drives with more power and adds years to sprinkler life

Drain check valve for up to 10 feet elevation change
Saves water, reduces liability

I-60 MODELS
I-60 ADS – Adjustable arc (40°–360°)
I-60 36S – Full circle

DIMENSIONS
• Pop-up height: 3″ (8 cm)
• Overall height: 8 3⁄8″ (21 cm)
• Female inlet: 1″ NPT or BSP
• Exposed diameter: 1 3/4″ (4.45 cm)

OPERATING SPECIFICATIONS
I-60 ADS
• Discharge rate: 6.5 to 20.4 GPM (1.48 to 4.63 m3/hr; 24.6 to 77.2 l/min)
• Radius: 50′ to 66′ (15.2 to 20.1 m)
• Recommended pressure range: 40 to 60 PSI (2.8 to 4.1 bars; 275 to 413 kPa)
• Operating pressure range: 20 to 100 PSI (1.4 to 6.9 bars; 137 to 689 kPa)
• Precipitation rates: approximately .29″ to .52″ (7 mm to 13 mm) per hour
• Nozzle trajectory: 25˚
I-60 36S
• Discharge rate: 6.5 to 20.8 GPM (1.48 to 4.72 m3/hr; 24.6 to 78.7 l/min)
• Radius: 51′ to 67′ (15.5 to 20.4 m)
• Recommended pressure range: 40 to 60 PSI (2.8 to 4.1 bars; 275 to 413 kPa)
• Operating pressure range: 20 to 100 PSI (1.4 to 6.9 bars; 137 to 689 kPa)
• Precipitation rates: approximately .25″ to .55″ (6 mm to 14 mm) per hour
• Nozzle trajectory: 25˚

Note: To ensure optimum nozzle performance, the rotor should be operated in the “Recommended pressure range.” The sprinkler will work normally when used in the “Operating pressure range”, but nozzle performance may be reduced.

OPTIONS AVAILABLE
• Reclaimed water cover
• Factory-installed nozzles