5000/5000 Plus Series Rotors

The Next Evolution in Rotor Performance

• Greener grass with less water – Rain Curtain™ nozzles deliver superior uniformity
• Even greater water savings with optional in-stem pressure regulation (PRS)
• Faster to install with matched precipitation rate using MPR nozzle set

Features

• Faster maintenance with a new self-cleaning arc adjustment screw
• 5000, 5000 Plus and 5000 Plus PRS Series Rotors are available in 4”, 6”, 12”, Shrub, and Stainless Steel (5000 Plus/5000 Plus PRS 4” & 6” only) models
• Standard rubber cover for extra protection. 5000 Plus/5000 Plus PRS feature a green cover while the 5000 features a black cover
• Heavy-duty cover assembly for extra durability in residential or commercial applications
• Rain Curtain™ Nozzles
• The 5000 Plus features a Flow Shut-Off device to stop the flow of water to a particular head while the system is still in operation.
• Slip clutch mechanism for quick adjustment on installation
• Heavy-duty retract spring assures positive pop-down
• Tree of nozzles including four low angle (Angle of Trajectory 10°) and eight standard angle Rain Curtain™ Nozzles (Angle of Trajectory 25°) provides 25 to 50 (7,6 to 15,2 m) distance of throw
• Award-winning MPR nozzle set simplifies design and installation by providing matched precipitation from 25’ to 35’ (7,6 to 10,7 m) (see page 52)
• Top-adjust arc adjustment requiring only a flat-blade screwdriver
• Five-year trade warranty
• 40 – 360° arc rotation and reversing full circle rotation in one. (A nonreversing full circle only unit is also available)
• Radius adjustment screw allows up to 25% radius reduction without changing nozzles
• True 4” (10 cm), 6” (15,2 cm) and 12” (30,5 cm) pop-up (measured from the cover to the nozzle)
• Pressure-activated multi-function wiper seal protects internals from debris and assures positive pop-up and retraction
• Reinforced flow path for additional side load strength
• Additional O-rings and seals for extra protection in “gritty” water
• Optional stainless steel riser helps deter vandalism on public turf areas (4” and 6” 5000 Plus/5000 Plus PRS only)
• Optional pre-installed Rain Curtain™ nozzle on most popular nozzles
• Optional Seal-A-Matic (SAM)™ check valve holds up to 7 feet (2,1 m) of elevation change, to prevent puddling and erosion caused by low head drainage
• Optional non-potable purple cover for easy identification of reclaimed water

Operating Range

• Precipitation rate: 0.20 to 1.01 inches per hour (5 to 26 mm/h)
• Radius: 25 to 50 feet (7,6 to 15,2 m)
• Radius may be reduced up to 25% with radius reduction screw
• Pressure: 25-65 psi (1,7 to 4,5 bar)
• Flow Rate: 0.73 to 9.63 gpm (4,2 to 36,6 l/m)

Specifications

• 3⁄4” (20/27) NPT female bottom threaded inlet
• Reversing full and part circle adjustment 40° – 360°
• Full circle only adjustment 360°

Dimensions

• Pop-up height: Shrub; 4” (10,2 cm); 6” (15,2 cm); 12” (30,5 cm)
• Overall body height: Shrub: 7 3⁄4” (19,7cm) 4”: 7 3⁄8” (18, 5 cm); 6”: 9 5⁄8” (24,5 cm); 12”: 16 7⁄8” (42,9 cm)
• Exposed surface diameter: 1 5⁄8” (4,1 cm)

Note: Pop-up height measured from the cover to the nozzle. Overall body height is measured popped down

Optional PRS Feature

• In-stem pressure regulator (PRS) reduces operating pressure to 45 psi (3,1 bar) for optimal nozzle performance
• PRS saves water by:
  - Eliminating head-to-head pressure variations
  - Eliminating misting due to high pressure
  - Improving nozzle distribution uniformity by operating the nozzle at optimum pressure
• Maintenance-free design can be easily retrofitted into existing 5000/5000 Plus, T-Bird™ and Hunter® PGP™ (using UPG model) rotor cases without digging up the entire body
• Pressure: 25-75 psi (1,7 to 5,2 bar)

Models

Part-Circle units (PC) are adjustable from 40 –360 degrees.
Full-Circle units (FC) are 360 degrees only.

• 5004-(PC or FC)-(SAM)-(NP)
• 5006-(PC or FC)-(SAM)-(NP)
• 5012-(PC or FC)-(SAM)-(NP)
• 5000-S-PL-(PC or FC)-(SAM)-(R)-(NP) – standard with SAM
• 5004-PL-(PC or FC)-(SAM)-(R)-(NP)-(SS)
• 5006-PL-(PC or FC)-(SAM)-(R)-(NP)-(SS)
• 5012-PL-(PC or FC)-(SAM)-(R)-(NP)

Note: Many models are available with a 2.0 or 3.0 nozzle pre-installed. NP and SS versions come standard with a SAM, PRS available in 5000 Plus

Falcon® 6504

Full- or Part-Circle Rotor Pop-Up Sprinklers

Primary Applications:

With the Falcon 6504 rotor, you can have it all — uncompromising performance, superior distribution, reliability and durability. Rain Curtain™ nozzles maximize performance and coverage. A multi-function wiper seal and tapered riser keep the stem clear of debris, providing long-term protection. Plus, heavy-duty construction makes the Falcon 6504 one of the toughest rotors in the field. Available in full- and part-circle models with optional stainless steel riser, the Falcon 6504 is ideal for large turf sites such as parks, athletic fields, cemeteries, schools and commercial sites with spacing up to 65 feet (19,8 m).

Features and Benefits:

• Stainless steel riser option helps deter vandalism on public turf areas.
• Five-year trade warranty..
• Easy arc adjustment (part-circle model) through top of rotor from 40° to 360°. No special tools required.
• Water-lubricated gear drive for reliable, durable rotation.
• Heavy-duty, stainless steel retract spring ensures positive pop-down.
• Standard black rubber cover or optional purple rubber cover for non-potable water.
• Removable Seal-A-Matic™ (SAM) check device prevents puddling and erosion caused by low-head drainage.
• Eight color-coded Rain Curtain™ nozzles offer greater design flexibility.
• Patented Rain Curtain™ nozzles have three ports for optimal long-range, mid-range, and close-in watering, for green grass even in the heat of summer.
• Nozzles are interchangeable from the front with no special tools.
• Self-adjusting stator does not require replacement when changing nozzles.
• Radius adjustment screw allows radius reduction up to 25% without changing nozzles.
• Small 2″ (5,1 cm) exposed diameter reduces possibility of injury in play areas.
• Patented, pressure-activated wiper seal and tapered riser stem on both plastic and stainless steel models protect internals from debris to ensure positive pop-up and retraction.
• 4″ (10,2 cm) pop-up height to center line of nozzle clears taller turfgrass.
• Stainless steel trip gears ensure long-term durability.
• Optional rubber collar for added safety on playing fields.
• High speed model completes full rotation in approximately one minute for quick wet-down of clay tennis courts and sports turf infield areas.
• Falcon rotors can be ordered from the factory with nozzles pre-installed in case quantities as a special order.

Models:

• F4-FC: Full-circle
• F4-PC: Part-circle
• F4-FC-NP: Full-circle, non-potable cover
• F4-PC-NP: Part-circle, non-potable cover
• F4-FC-SS: Full-circle, stainless steel
• F4-PC-SS: Part-circle, stainless steel
• F4-FC-SS-NP: Full-circle, stainless steel, non-potable cover
• F4-PC-SS-NP: Part-circle, stainless steel, non-potable cover
• F4-FC-SS-HS: Full-circle, stainless steel, high speed
• F4-PC-SS-HS: Part-circle, stainless steel, high speed
  Note: All models available with BSP threads.

Specifications:

• Precipitation Rate: 0.37 to 1.14 inches per hour (9 to 29 mm/h)
• Radius: 39 to 65 feet (11,9 to 19,8 m)
• Pressure: 30 to 90 psi (2,1 to 6,2 Bars)
• Flow: 2.9 to 21.7 GPM (0,66 to 4,93 m³/h; 0,18 to 1,37 l/s)
• 1″ (26/34) female NPT or BSP threaded inlet
• SAM check device holds up to 10 feet (3,1 m) of elevation change
• Rain Curtain nozzles: 04-black; 06-light blue; 08-dark green; 10-gray; 12-beige; 14-light green; 16-dark brown; 18-dark blue
• Nozzle outlet trajectory is 25°

Dimensions:

• Overall height: 8 1/2″ (21,6 cm)
• Pop-up height: 4″ (10,2 cm)
• Exposed surface diameter: 2″ (5,1 cm)
  Note: Pop-up height is measured from cover to center of nozzle. Overall body height is measured popped down.

Rain Bird® 5500 Series Rotors

Bigger. Better. Built to Last.

Rain Bird® 5500 Series Rotors are built to withstand the harsh conditions and vandalism present in commercial rotor applications. They have been designed and tested to ensure the high reliability demanded by the market today. The 5500 Series offers the durability and performance of Rain Bird’s best commercial rotors in a package designed to excel in short to midrange applications.

NEW! Short Throw Nozzle Set extends the 5500 Series Rotor performance down to the 17′ radius!

Features

• Five year trade warranty.
• Memory Arc® returns the rotor to its original arc setting.
• Non-strippable drive mechanism prevents damage from vandals.
• Brass reinforcing shaft of the nozzle turret to riser withstands vandal kick.
• Optional stainless steel riser model helps deter vandalism on public turf areas.
• Continuous full and part circle operation in one unit to reduce inventory requirements.
• Easy, wet, dry arc adjustment with slotted screwdriver through top of rotor from 50° to 330° part-circle, 360° non-reversing full-circle.
• Left and right side trips adjustable for ease of installation without turning the case and loosening the pipe connection.
• Seal-A-Matic™ (SAM) check device/riser to help prevent low head drainage.
• Water-lubricated gear drive.
• Rain Curtain™ nozzles for optimal distribution and close-in watering resulting in superior uniformity.
• Nozzles are interchangeable from the front with no special tools.
• Self-adjusting stator allows nozzle replacement with no other adjustments required.
• Heavy duty retract spring ensures positive pop-down.
• Standard black rubber cover
• Optional purple rubber cover for nonpotable applications

Operating Range

• Precipitation Rate: 0.21 to 1.48 in/hr (6,3 to 33,8 mm/h)
• Radius: 17 to 55 feet (5,2 to 16,8m)
• Pressure: 30 to 90 psi (2,1 to 6,2 Bars)
• Flow: 1.2 to 15.5 gpm (0,32 to 3,52 m³/h; 4,52 to 58,66 l/m)

Specifications

• 3/4″ (20/27) NPT or BSP female threaded inlet
• SAM check device holds up to 10 feet (3,1 m) of head
• Rain Curtain nozzles:
  2.0 – Orange
  3.0 – Red
  4.0 – Black
  5.0 – Yellow
  6.0 – Light Blue
  8.0 – Dark Green
  10.0 – Grey
  12.0 – Beige
  Short Throw Nozzle Tree (18S, 22S, 26S, 30S) – Aqua
• Nozzle outlet trajectory is 22°

Dimensions

• Exposed diameter: 1 3/4″ (4,4 cm)
• Overall diameter: 2 3/4″ (7,0 cm)
• Overall height: 9 1/4″ (23,5 cm)
• Pop-up height: 5″ (12,7 cm)
  Note: Pop-up height is measured from cover to the primary nozzle port. Overall body height is measured popped down.

Models

• 5505: 3/4″ NPT female threaded inlet (5″ plastic riser stem)
• 5505-SS: 3/4″ NPT female threaded inlet (5″ stainless steel covered riser stem)
• 5512: 3/4″ NPT female threaded inlet (12″ plastic riser stem)

7005 Rotor

Full- or Part-Circle Rotor Pop-Up Sprinklers

Primary Applications:

The Rain Bird® 7005 Rotor is built rugged to withstand the harsh conditions and vandalism present in commercial rotor applications. It has been designed and tested to ensure the high reliability demanded by the market today. With its extensive customer identified features, it is versatile enough to fit all applications.

Features and Benefits:

• Five year trade warranty.
• Memory Arc® returns the rotor to its original arc setting.
• Non-strippable drive mechanism prevents damage from vandals.
• Brass reinforcing shaft of the nozzle turret to riser withstands vandal kick.
• Optional stainless steel riser model helps deter vandalism on public turf areas.
• Full and part circle operation in one unit to reduce inventory requirements.
• Easy, wet, dry arc adjustment with slotted screwdriver through top of rotor from 50° to 330° part-circle, 360° non-reversing full-circle.
• Left and right side trips adjustable for ease of installation without turning the case and loosening the pipe connection.
• Seal-A-Matic™ (SAM) check device/riser to help prevent low head drainage.
• Water-lubricated gear drive.
• Rain Curtain™ nozzles for optimal distribution and close-in watering resulting in superior uniformity.
• Nozzles are interchangeable from the front with no special tools.
• Self-adjusting turbine stator allows nozzle replacement with no other adjustments required.
• Heavy duty retract spring ensures positive pop-down.
• Standard black rubber cover
• Optional Purple rubber cover for nonpotable applications

Models:

• 7005: 1″ NPT female threaded inlet (plastic riser stem)
• 7005-SS: 1″ NPT female threaded inlet (stainless steel covered riser stem)
• Optional rubber collar (black)
• Optional non-potable rubber collar (purple)

*Note: All models available with BSP threads.

Specifications:

• Radius: 39 to 71 feet (11,9 to 21,7 m)
• Pressure: 50 to 90 PSI (3,5 to 6,2 Bars)
• Flow: 3.8 to 22.2 GPM (0,86 to 5,04 m³/h; 0,24 to 1,40 l/s)
• 1″ (26/34) female NPT or BSP threaded inlet
• SAM check device holds up to 10 feet (3,1 m) of elevation change
• Rain Curtain nozzles: 04-black; 06-light blue; 08-dark green; 10-gray; 12-beige; 14-light green; 16-dark brown; 18-dark blue
• Nozzle outlet trajectory is 25°

Dimensions:

• Exposed diameter: 1 7/8″ (4,8 cm)
• Overall diameter: 3 1/8″ (7,9 cm)
• Overall height: 10 1/8″ (25,7 cm)
• Pop-up height: 5″ (12,7 cm)

Note: Pop-up height is measured from cover to center of primary nozzle port. Overall body height is measured popped down.

8005 Rotor

Bigger, Better, Built to Last

The Rain Bird® 8005 Rotor is built rugged to withstand the harsh conditions and vandalism present in commercial rotor applications. It has been designed and tested to ensure the high reliability demanded by the market today. Its extensive customer identified features and 80 foot radius make it ideal for sportsfields, parks and other large turf applications.

Features and Benefits:

• Five year trade warranty.
• Memory Arc® returns the rotor to its original arc setting.
• Non-strippable drive mechanism prevents damage from vandals.
• Brass reinforcing shaft of the nozzle turret to riser withstands vandal kick.
• Optional stainless steel riser model helps deter vandalism on public turf areas.
• Full and part circle operation in one unit to reduce inventory requirements.
• Easy, wet, dry arc adjustment with slotted screwdriver through top of rotor from 50° to 330° part-circle, 360° non-reversing full-circle.
• Left and right side trips adjustable for ease of installation without turning the case and loosening the pipe connection.
• Seal-A-Matic™ (SAM) check device/riser to help prevent low head drainage.
• Water-lubricated gear drive.
• Rain Curtain™ nozzles for optimal distribution and close-in watering resulting in superior uniformity.
• Nozzles are interchangeable from the front with no special tools.
• Self-adjusting turbine stator allows nozzle replacement with no other adjustments required.
• Heavy duty retract spring ensures positive pop-down.
• Standard rubber cap. (Green)
• Optional Purple rubber cover for nonpotable applications

Models:

• 8005: 1″ NPT female threaded inlet (plastic riser stem).
• 8005-SS: 1″ NPT female threaded inlet (stainless steel covered riser stem).
• Optional rubber collar (black)
• Optional non-potable rubber collar (purple)
  *All models available with BSP threads

Specifications:

• Radius: 57 to 81 feet (17,4 to 24,7 m)
• Pressure: 50 to 100 psi (3,5 to 6,9 Bars)
• Flow: 11.1 to 36.3 GPM (2,54 to 8,24 m³/h; 0,70 to 2,29 l/s)
• 1″ (26/34) female NPT or BSP threaded inlet
• SAM check device holds up to 10 feet (3,1 m) of head
• Rain Curtain nozzles: 12-beige; 14-light green; 16-dark brown; 18-dark blue; 20-red; 22-yellow; 24-orange; 26-white
• Nozzle outlet trajectory is 25°

Dimensions:

• Exposed diameter: 1 7/8″ (4,8 cm)
• Overall diameter: 3 1/8″ (7,9 cm)
• Overall height: 10 1/8″ (25,7 cm)
• Pop-up height: 5″ (12,7 cm)

Note: Pop-up height is measured from cover to center of primary nozzle port. Overall body height is measured popped down.

I-90 Rotary Sprinkler

Industry’s longest distance rotary sprinkler specifically designed for parks, sports fields, and public areas.

With a radius up to 96 feet from a single sprinkler, the I-90 boasts a coverage area no other commercial sprinkler can deliver. Yet, its reduced-size diameter and cushioned rubber cover make it the perfect choice for parks and wide-open lawn areas, as well as perimeter watering of athletic fields and horse arenas. The rotor is also perfectly easy to service, with a “jar-top” body cap that allows quick access to the filter screen and check valve with no extra pieces, parts, or tools required. The I-90 is offered in two models–a full-circle opposing-nozzle version or an adjustable arc model–each with color-coded nozzles that can be field-changed to match the specific needs of your site.

Extra-thick heavy-duty rubber cover
Helps keep playing surfaces safe

6 color-coded primary nozzles
Truly uniform coverage and fast identification

Jar top serviceability
Easy access to screen, gear drive and valve assemblies

Closed case rotor
Absolute protection from dirt

Proven, heavy-duty gear drive
Enduring reliability

Water activated riser seal
Clean flushing action and positive retraction

Heavy duty stainless steel spring
Assures positive retraction, time after time

Drain check valve to handle elevation change
Saves water, reduces liability

I-90 MODELS
I-90 36V – Full circle
I-90 ADV – Adjustable arc (40°–360°)DIMENSIONS
• Pop-up height: 3″ (7.6 cm)
• Female inlet: 1 1/2″ NPT or BSP
• Exposed diameter: 3 1/2″ (8.9 cm)
• Overall height: 11″ (28 cm)OPERATING SPECIFICATIONS
I-90 36V
• Discharge rate: 29.8 to 69.4 GPM (6.77 to 15.76 m3/hr, 113 to 263 l/min)
• Radius: 71′ to 96′ (21 to 29.3 m)
• Recommended pressure range: 60 to 100 PSI (4.1 to 6.9 bars; 275 to 689 kPa)
• Operating pressure range: 50 to 100 PSI (3.4 to 6.9 bars; 344 to 689 kPa)
I-90 ADV
• Discharge rate: 30.7 to 69.8 GPM (6.97 to 15.85 m3/hr, 116 to 264 l/min)
• Radius: 67′ to 90′ (20.4 to 27.4 m)
• Recommended pressure range: 60 to 100 PSI (4.1 to 6.9 bars; 275 to 689 kPa)
• Operating pressure range: 50 to 100 PSI (3.4 to 6.9 bars; 344 to 689 kPa)Note: To ensure optimum nozzle performance, the rotor should be operated in the “Recommended pressure range.” The sprinkler will work normally when used in the “Operating pressure range”, but nozzle performance may be reduced.

OPTIONS AVAILABLE
• Reclaimed water identification
• Factory-installed nozzles
• Turf Cup Kit (part # 467955)

Key to Features:
ADV = Adjustable Arc with Check Valve
36V = Full-Circle with Check Valve
ARV = Adjustable Arc, Reclaimed Water, with Check Valve
3RV = Full-Circle, Reclaimed Water, with Check Valve

I-60 Rotary Sprinkler

A large turf rotor that meets the demands of systems with lower pressures and smaller budgets.

Facilities with wide expanses of turf require rotors that can cover great distances. But, the farther the rotors are spread apart, the higher the pressure needs to be to cover the throw. With municipal water supplies, more often than not, the pressure is too low for the rotors to work effectively. Instead of the expense of installing a pump to get the pressure up to an operational level, Hunter offers you a more efficient (cost and performance) way. The I-60 lets you space rotors far enough apart, as is desirable in a large landscape such as a city park or community sports complex. Because it is designed to operate under lower pressure, it’s a rotor that makes good economic sense. And, since it uses less water to run, the I-60 also eliminates the need to install larger pipe (another savings for the budget conscious).

Patented Precision Distribution Control™
Assures even coverage at low pressures without the need for a booster pump

6 color-coded nozzles
Truly uniform coverage and fast identification

Stainless-steel riser
Increased durability in harsh soil conditions

Easy arc adjustment (40° – 360°)
Up, down, wet or dry with through the top convenience

Heavy-duty, water-lubricated gear drive
Enduring reliability, year after year

Patented VStat® self adjusting stator
No stator rings required, drives with more power and adds years to sprinkler life

Drain check valve for up to 10 feet elevation change
Saves water, reduces liability

I-60 MODELS
I-60 ADS – Adjustable arc (40°–360°)
I-60 36S – Full circle

DIMENSIONS
• Pop-up height: 3″ (8 cm)
• Overall height: 8 3⁄8″ (21 cm)
• Female inlet: 1″ NPT or BSP
• Exposed diameter: 1 3/4″ (4.45 cm)

OPERATING SPECIFICATIONS
I-60 ADS
• Discharge rate: 6.5 to 20.4 GPM (1.48 to 4.63 m3/hr; 24.6 to 77.2 l/min)
• Radius: 50′ to 66′ (15.2 to 20.1 m)
• Recommended pressure range: 40 to 60 PSI (2.8 to 4.1 bars; 275 to 413 kPa)
• Operating pressure range: 20 to 100 PSI (1.4 to 6.9 bars; 137 to 689 kPa)
• Precipitation rates: approximately .29″ to .52″ (7 mm to 13 mm) per hour
• Nozzle trajectory: 25˚
I-60 36S
• Discharge rate: 6.5 to 20.8 GPM (1.48 to 4.72 m3/hr; 24.6 to 78.7 l/min)
• Radius: 51′ to 67′ (15.5 to 20.4 m)
• Recommended pressure range: 40 to 60 PSI (2.8 to 4.1 bars; 275 to 413 kPa)
• Operating pressure range: 20 to 100 PSI (1.4 to 6.9 bars; 137 to 689 kPa)
• Precipitation rates: approximately .25″ to .55″ (6 mm to 14 mm) per hour
• Nozzle trajectory: 25˚

Note: To ensure optimum nozzle performance, the rotor should be operated in the “Recommended pressure range.” The sprinkler will work normally when used in the “Operating pressure range”, but nozzle performance may be reduced.

OPTIONS AVAILABLE
• Reclaimed water cover
• Factory-installed nozzles

The Spotlight is on the
I-40 Ultra Performance Rotor

INDIVIDUAL UNIFORMITY AND CLOSE-IN COVERAGE

The I-40 Ultra is the number one choice for sports facilities worldwide. Ideal for parks and commercial sites. A tough commercial rotor that delivers with accuracy at watering distances up to 70 feet. From stadiums to practice fields and other sites, this group performs. Plus, the aesthetics and strength of stainless steel is undeniable. Looks good, made to last. Choose the I-40 Ultra for ultimate performance, effective irrigation, and beautiful results.

Models

• I-40-04-SS – 4” Stainless steel, heavy-duty rotor
• I-40-04-SS-HS – 4” Stainless steel, high-speed heavy-duty rotor
• I-40-06-SS – 6” Stainless steel, heavy-duty rotor
• I-40-06-SS-HS – 6” Stainless steel, high-speed heavy-duty rotor

DIMENSIONS

• Overall height:
  • I-40-04-SS (SS-HS) – 7-7/8”
  • I-40-06-SS (HS) – 10-1/4″
• Female inlet: 1” NPT or BSP
• Exposed diameter: 2”

Operating Specifications

• Discharge rate: 7.0 to 28.2 GPM
• Radius for I-40, I40-04-SS, I40-06-SS: 45’ to 70’
• Radius for I-40-04-SS-ON, I-40-06-SS-ON: 52’ to 76’
• Radius for I-40-04-SS-HS, I-40-06-SS-HS: 41’ to 65’
• Recommended pressure range: 40 to 100 PSI
• Operating pressure range: 40 to 100 PSI
• Precipitation rates: approximately 0.33” to 0.48” per hour
• Nozzle trajectory: 25˚
• Drain check valve for up to 15′ elevation change

Options Available

• The turf cup kit (part # 460000) for the I-40 sprinkler allows the addition of a plug of living sod to the top of the riser. Perfect for areas where an invisible sprinkler is required. Not available for
  ON model.
• Dual opposing nozzle (full-circle version) I-40-04-SS-ON, I-40-06-SS-ON
• Reclaimed water cover
• Factory-installed nozzles

I-35 Sierra Rotary Sprinkler

Take performance to unimagined heights with complete control and cutting-edge innovation.

Discover the I-35 Sierra. The latest in Hunter commercial rotor technology. Pure simplicity takes the I-35 Sierra to new levels. We kept what makes Hunter rotors world famous and added features that make it more advanced. We believe in consistency—Every Hunter rotor adjusts exactly the same. And the I-35 is no exception. The result: a superior solution.

Features and Benefits:

Full and part circle operation in a single rotor, for reduced stock.

I-35 MODELS

• I-35 – 5 1/2″ (14 cm) Plastic riser, Commercial duty rotor
• I-35-SS – 5 1/2″ (14 cm) Stainless steel riser, Commercial duty rotor

DIMENSIONS

• Overall height: I-35, I-35-SS, I-35-HS – 10 3/8″ (26 cm)
• Female inlet: 1″ NPT or BSP
• Exposed diameter: 1 7⁄8″ (5 cm)

OPERATING SPECIFICATIONS

• Discharge rate: 7.7 to 31.5 GPM (1.65 to 7.24 m3/hr; 27.5 to 120.7 l/min)
• Radius for I-35: 47′ to 71′ (14.0 to 21.6 m)
• Radius for I-35-HS: 42′ to 67′ (12.5 to 20.4 m)
• Recommended pressure range: 40 to 100 PSI (2.5 to 7.0 bars; 248 to 696 kPa)
• Operating pressure range: 40 to 100 PSI (2.5 to 7.0 bars; 248 to 696 kPa)
• Precipitation rates: approximately .67″ to 1.2″ (17 to 31 mm) per hour
• Nozzle trajectory: 25˚

Note: To ensure optimum nozzle performance, the rotor should be operated in the “Recommended pressure range.” The sprinkler will work normally when used in the “Operating pressure range”, but nozzle performance may be reduced.

OPTIONS AVAILABLE

• For quick, light wetdowns of sports fields or any areas that require dust control, Hunter offers the high-speed version, I-35 HS, that cuts full circle rotation time from three minutes down to one
• Reclaimed water cover
• Factory-installed nozzles

I-25 Ultra Performance Rotor
More Distance, Larger Radius

The I-25 Ultra gets the job done while keeping your wallet at ease. This rotor covers more distance, hitting a radius of 40’ to 71’. The compact and built-to-last construction comes with an optional stainless steel riser for tough-as-nails strength. With a 5-year warranty, the I-25 Ultra has options for reclaimed water ID and high-speed. A standard check valve is built in, and a wide selection of high performance nozzles are availabe. Hunter I-25 Ultra rotors cover more distance and larger radius. Efficient, tough, and built to last.

Models

• I-25-04 – 3-1/2” Plastic riser, commercial duty rotor
• I-25-04-SS – 3-1/2” Stainless steel riser, commercial duty rotor
• I-25-04-SS-HS – 3-1/2” High speed, stainless steel riser, commercial duty rotor
• I-25-06 – 5-1/2” Plastic riser, commercial duty rotor
• I-25-06-SS – 5-1/2” Stainless steel riser, commercial duty rotor
• I-25-06-SS-HS – 5-1/2” High speed, stainless steel riser, commercial duty rotor

DIMENSIONS

• Overall height:
  • I-25-04 (SS, SS-HS) – 7-7/8”
  • I-25-06 (SS, SS-HS) – 10-1/4”
• Female inlet: 1” NPT or BSP
• Exposed diameter: 1-7/8”

Operating Specifications

• Discharge rate: 3.8 to 31.5 GPM
• Radius for I-25-04, I-25-06: 40’ to 71’
• Radius for I-25-04-SS-HS, I-25-06-SS-HS: 37’ to 67’
• Recommended pressure range: 40 to 100 PSI
• Operating pressure range: 40 to 100 PSI
• Precipitation rates: approximately 0.23” to 0.57” per hour
• Nozzle trajectory: 25˚
• Drain check valve for up to 10′ elevation change

OPTIONS AVAILABLE

• For quick, light wetdowns of sports fields or any areas that require dust control, Hunter offers the high-speed version, I-25 Ultra HS, that cuts full circle rotation time from three minutes down to one.
• Reclaimed water cover.
• Factory-installed nozzles.